Comprehensive data protection for all workloads
Post Reply
TrK
Novice
Posts: 8
Liked: never
Joined: Mar 15, 2011 8:17 am
Full Name: Dmitry Chernyavsky
Contact:

CBT on first (full) backup, how?

Post by TrK »

Yesterday i made clean reinstall of my Veeam B&R v5 to NEW computer, create a NEW job and select NEW destination file.
On first (full) run some VM shows "Backup mode: NBD without changed block tracking" (and it`s ok, AFAIK), but some shows "NBD with changed block tracking".

How is it possible? And can it be a problem on future restore?
Vitaliy S.
VP, Product Management
Posts: 27055
Liked: 2710 times
Joined: Mar 30, 2009 9:13 am
Full Name: Vitaliy Safarov
Contact:

Re: CBT on first (full) backup, how?

Post by Vitaliy S. »

Hello Dmitry,

I'm fairly sure that the full run was performed without Changed Block Tracking (based on your descripition). However, could you please clarify if you've seen this message while processing VMDK disks?

Thank you.
Gostev
Chief Product Officer
Posts: 31460
Liked: 6648 times
Joined: Jan 01, 2006 1:01 am
Location: Baar, Switzerland
Contact:

Re: CBT on first (full) backup, how?

Post by Gostev »

Changed block tracking can be used during full run in a special mode that only returns VMDK blocks occupied by data. So what you are seeing is normal. Thanks.
TrK
Novice
Posts: 8
Liked: never
Joined: Mar 15, 2011 8:17 am
Full Name: Dmitry Chernyavsky
Contact:

Re: CBT on first (full) backup, how?

Post by TrK »

Vitaliy S. wrote: could you please clarify if you've seen this message while processing VMDK disks?
Yes, i`ve seen this while processing and after that.
TrK
Novice
Posts: 8
Liked: never
Joined: Mar 15, 2011 8:17 am
Full Name: Dmitry Chernyavsky
Contact:

Re: CBT on first (full) backup, how?

Post by TrK »

Gostev wrote:Changed block tracking can be used during full run in a special mode that only returns VMDK blocks occupied by data.
Ok, then why other VMs was processed without CBT?
Almost forgot. I have four ESXi - two 4.0u1 and two 4.1.Could this be the cause of this issue?
Gostev
Chief Product Officer
Posts: 31460
Liked: 6648 times
Joined: Jan 01, 2006 1:01 am
Location: Baar, Switzerland
Contact:

Re: CBT on first (full) backup, how?

Post by Gostev »

The real cause for this issue is that this so-called "initial" CBT does not work reliably with VMware. For some VMs it works, for other it does not. By "does not work" I mean not that it fails to return only occupied blocks, so our engine has to go through all blocks including unoccupied (which is still very fast). Thus, these failures do not really cause any issues to our product.

We have put some effort into researching this last year, but did not find any patterns on why it would not work in some cases. We did find that in most cases, this can be "fixed" by disabling/enabling CTK in VM settings paired by VM poweroff after each change (can't remember exact sequence, multi-step process). So most likely just a bug on VMware side. But since working initial CBT is not too big of a deal for a full backup, we stopped pursuing this (this issue does not affect "incremental" change tracking, this one is flawless).
joergr
Veteran
Posts: 391
Liked: 39 times
Joined: Jun 08, 2010 2:01 pm
Full Name: Joerg Riether
Contact:

Re: CBT on first (full) backup, how?

Post by joergr »

I have also done quite some research on this and found no pattern, it happens even on the very same esxi 4.1 machine with freshly 1:1 deployed windows servers which are absolutely the same. It is exactly the way like Anton explained to you, some are doing CBT from the very first backup, some are not. But what is very important to know here: Your Backup will be 100% OK, neither it can do CBT on first run nor it can´t.

Best regards,
Joerg
Post Reply

Who is online

Users browsing this forum: Amazon [Bot], Semrush [Bot] and 219 guests