-
- Novice
- Posts: 7
- Liked: never
- Joined: Jan 09, 2014 1:48 pm
- Full Name: Mohammed Marhoon
- Contact:
Veeam Backup for Azure v4 Access from Public IP
I installed Veeam Backup for Azure v4 from Marketplace, I can access it from internal IP but form Public I can not even I check port 443 allow on NSG
please advice.
Case #06022250
please advice.
Case #06022250
-
- Product Manager
- Posts: 5838
- Liked: 1220 times
- Joined: Jul 15, 2013 11:09 am
- Full Name: Niels Engelen
- Contact:
Re: Veeam Backup for Azure v4 Access from Public IP
Hi,
Without insight, this will be hard to resolve via our forums. These are also no support forums. This sounds like a firewall issue that blocks incoming requests on the public IP. Our support will most likely be able to resolve this with a remote call.
Without insight, this will be hard to resolve via our forums. These are also no support forums. This sounds like a firewall issue that blocks incoming requests on the public IP. Our support will most likely be able to resolve this with a remote call.
Personal blog: https://foonet.be
GitHub: https://github.com/nielsengelen
GitHub: https://github.com/nielsengelen
-
- Novice
- Posts: 7
- Liked: never
- Joined: Jan 09, 2014 1:48 pm
- Full Name: Mohammed Marhoon
- Contact:
Re: Veeam Backup for Azure v4 Access from Public IP
Hi
Appreciate that, we check the NSG and 443 allowed on the Public IP
Appreciate that, we check the NSG and 443 allowed on the Public IP
-
- Product Manager
- Posts: 5838
- Liked: 1220 times
- Joined: Jul 15, 2013 11:09 am
- Full Name: Niels Engelen
- Contact:
Re: Veeam Backup for Azure v4 Access from Public IP
And is the IP correctly associated with the new VM? Have you tried adding port 22 and see if you can SSH into the host?
Personal blog: https://foonet.be
GitHub: https://github.com/nielsengelen
GitHub: https://github.com/nielsengelen
-
- Novice
- Posts: 7
- Liked: never
- Joined: Jan 09, 2014 1:48 pm
- Full Name: Mohammed Marhoon
- Contact:
Re: Veeam Backup for Azure v4 Access from Public IP
The Port 22 Open but when we go to connect using SSH we get error
Port prerequisite not met.
Port prerequisite not met.
-
- Product Manager
- Posts: 5838
- Liked: 1220 times
- Joined: Jul 15, 2013 11:09 am
- Full Name: Niels Engelen
- Contact:
Re: Veeam Backup for Azure v4 Access from Public IP
That usually means the NSG is not configured correctly. I just checked a config on my lab and have the following.
Could you verify if you have the same?
Code: Select all
Priority: 300
Name: Port_443
Port(Destination): 443
Protocol: TCP
Source: Any
Destinations: Any
Action: Allow
Personal blog: https://foonet.be
GitHub: https://github.com/nielsengelen
GitHub: https://github.com/nielsengelen
-
- Novice
- Posts: 7
- Liked: never
- Joined: Jan 09, 2014 1:48 pm
- Full Name: Mohammed Marhoon
- Contact:
Re: Veeam Backup for Azure v4 Access from Public IP
I have the following in Inbound Port Rules
Priority 200 SSH 22-22 TCP Any Any Allow
Priority 1010 HTTPS 443-443 TCP Any Any Allow
Priority 1011 HHTP 80-80 TCP Any Any Allow
Priority 200 SSH 22-22 TCP Any Any Allow
Priority 1010 HTTPS 443-443 TCP Any Any Allow
Priority 1011 HHTP 80-80 TCP Any Any Allow
Who is online
Users browsing this forum: No registered users and 4 guests