-
- Influencer
- Posts: 17
- Liked: 1 time
- Joined: Apr 13, 2016 2:42 pm
- Full Name: Sebastian S
- Contact:
Backup Proxy doesn't work properly
Hello guys,
we use a Windows 2012 R2 Server as backup Proxy for our backups. The Transport mode is Direct San. The backup Proxy is configured like in the Evaluators Guide VMware described, but sometimes some of the backup Jobs don't work properly and throw an AgentClosedException. In this case the error was thrown on 14th May and on 30th May, between that our backup Job was perfectly fine and successful. After opening a case it was said we should use the VMware Backup Proxy, of course we could use this Proxy, but this Proxy is way too slow, while we reach a Speed approximately around 100 MB/s with w2k12r2 backup Proxy, we only reach a Speed of around 24Mb/s with the VMware backup Proxy.
What could cause the Problem with our w2k12r2 backup Proxy? Does anyone have an idea or should I open another case?
we use a Windows 2012 R2 Server as backup Proxy for our backups. The Transport mode is Direct San. The backup Proxy is configured like in the Evaluators Guide VMware described, but sometimes some of the backup Jobs don't work properly and throw an AgentClosedException. In this case the error was thrown on 14th May and on 30th May, between that our backup Job was perfectly fine and successful. After opening a case it was said we should use the VMware Backup Proxy, of course we could use this Proxy, but this Proxy is way too slow, while we reach a Speed approximately around 100 MB/s with w2k12r2 backup Proxy, we only reach a Speed of around 24Mb/s with the VMware backup Proxy.
What could cause the Problem with our w2k12r2 backup Proxy? Does anyone have an idea or should I open another case?
-
- Product Manager
- Posts: 5619
- Liked: 1177 times
- Joined: Jul 15, 2013 11:09 am
- Full Name: Niels Engelen
- Contact:
Re: Backup Proxy doesn't work properly
Which method is being used by the default proxy? Does it say NBD, hotadd or SAN? Also what is your network config like?
Personal blog: https://foonet.be
GitHub: https://github.com/nielsengelen
GitHub: https://github.com/nielsengelen
-
- Influencer
- Posts: 17
- Liked: 1 time
- Joined: Apr 13, 2016 2:42 pm
- Full Name: Sebastian S
- Contact:
Re: Backup Proxy doesn't work properly
Hey Niels thanks for your fast reply,
I looked into a Report of one of the VMware Backup Proxy backups, here it says: "31.05.2016 00:09:28 :: Using backup proxy VMware Backup Proxy for disk Hard disk 1 [san]"
The w2k12r2 backup Proxy uses hotadd.
The VMware backup Proxy uses "autmoatic selection" as Transport mode and as additional Option "Failover to Network mode if Primary mode Fails, or is unavailable".
In traffic rules there is just the empty table of manage Network and traffic rules.
Is there a way to see the Network configuration within Veeam B&R, because I am not sure where to look?
I looked into a Report of one of the VMware Backup Proxy backups, here it says: "31.05.2016 00:09:28 :: Using backup proxy VMware Backup Proxy for disk Hard disk 1 [san]"
The w2k12r2 backup Proxy uses hotadd.
The VMware backup Proxy uses "autmoatic selection" as Transport mode and as additional Option "Failover to Network mode if Primary mode Fails, or is unavailable".
In traffic rules there is just the empty table of manage Network and traffic rules.
Is there a way to see the Network configuration within Veeam B&R, because I am not sure where to look?
-
- Product Manager
- Posts: 5619
- Liked: 1177 times
- Joined: Jul 15, 2013 11:09 am
- Full Name: Niels Engelen
- Contact:
Re: Backup Proxy doesn't work properly
Was more wondering if you have 1 or 10 gbit. Also the speeds you are seeing, is this with a full or incremental backup?
Personal blog: https://foonet.be
GitHub: https://github.com/nielsengelen
GitHub: https://github.com/nielsengelen
-
- Influencer
- Posts: 17
- Liked: 1 time
- Joined: Apr 13, 2016 2:42 pm
- Full Name: Sebastian S
- Contact:
Re: Backup Proxy doesn't work properly
Ah okay my bad, we only have 1 gbit.
Okay the processing rate of the VMware backup Proxy was around 64MB/s while doing a full backup, which must be some sort of average Speed, because when I looked into our backup Job yesterday it was still running between 10mbit/s and 24 mbit/s.
The other backup Job which uses the w2k12r2 had a Processing rate of 90mbit/s although this was an incremental backup. I can give you more Feedback tomorrow, after both backup Jobs have done an incremental backup, might be a bad example in this case.
But the best Thing would be to fix the w2k12r2 backup Proxy, but I don't know how because I can't tell why it throws an exception from time to time when it runs successful most of the other times.
Okay the processing rate of the VMware backup Proxy was around 64MB/s while doing a full backup, which must be some sort of average Speed, because when I looked into our backup Job yesterday it was still running between 10mbit/s and 24 mbit/s.
The other backup Job which uses the w2k12r2 had a Processing rate of 90mbit/s although this was an incremental backup. I can give you more Feedback tomorrow, after both backup Jobs have done an incremental backup, might be a bad example in this case.
But the best Thing would be to fix the w2k12r2 backup Proxy, but I don't know how because I can't tell why it throws an exception from time to time when it runs successful most of the other times.
-
- Product Manager
- Posts: 5619
- Liked: 1177 times
- Joined: Jul 15, 2013 11:09 am
- Full Name: Niels Engelen
- Contact:
Re: Backup Proxy doesn't work properly
In regards to the speeds, they look normal for full jobs.
Please open a case to get the exception issue resolved.
Please open a case to get the exception issue resolved.
Personal blog: https://foonet.be
GitHub: https://github.com/nielsengelen
GitHub: https://github.com/nielsengelen
-
- Influencer
- Posts: 17
- Liked: 1 time
- Joined: Apr 13, 2016 2:42 pm
- Full Name: Sebastian S
- Contact:
Re: Backup Proxy doesn't work properly
Thanks I will do that and another thanks for letting me know that this seems to be normal Speed for a full backup.
Who is online
Users browsing this forum: Google [Bot] and 225 guests