-
- Veteran
- Posts: 7328
- Liked: 781 times
- Joined: May 21, 2014 11:03 am
- Full Name: Nikita Shestakov
- Location: Prague
- Contact:
Re: Veeam ONE vNEXT feedback/wishlist
Thanks for the request! Once you have a question or feedback, don`t hesitate sharing.
-
- Novice
- Posts: 8
- Liked: never
- Joined: Mar 30, 2015 2:11 pm
- Full Name: Gilles BRUNO - Grenoble Univ.
- Location: Grenoble - France
- Contact:
Re: Veeam ONE vNEXT feedback/wishlist
Hello folks,
(excuse my poor english)
I don't know if this has been submitted before, but under Alarm Management, being able to used both VM *Folders* (VM & Template view) and VM *tags* would be nice (under alarm definition or exclusion)
Eg. tweak the predefined "VM with no backup" alarm so as to exclude those VMs tagged with a vSphere defined "No Backup" TAG (exlusion)
Eg. define a specific alarm for used tagged vital VMs (vm cpu usage for thos with "Production" TAG).
Regards,
(excuse my poor english)
I don't know if this has been submitted before, but under Alarm Management, being able to used both VM *Folders* (VM & Template view) and VM *tags* would be nice (under alarm definition or exclusion)
Eg. tweak the predefined "VM with no backup" alarm so as to exclude those VMs tagged with a vSphere defined "No Backup" TAG (exlusion)
Eg. define a specific alarm for used tagged vital VMs (vm cpu usage for thos with "Production" TAG).
Regards,
-
- Veteran
- Posts: 7328
- Liked: 781 times
- Joined: May 21, 2014 11:03 am
- Full Name: Nikita Shestakov
- Location: Prague
- Contact:
Re: Veeam ONE vNEXT feedback/wishlist
Hello and welcome to the community!
You can synchronize VMware tags with Veeam ONE Business View groups and use them for the alarms assignment.
Thanks!
You can synchronize VMware tags with Veeam ONE Business View groups and use them for the alarms assignment.
Thanks!
-
- Lurker
- Posts: 2
- Liked: never
- Joined: Mar 06, 2017 5:00 pm
- Full Name: Mike Wachholz
- Contact:
Re: Veeam ONE vNEXT feedback/wishlist
I had a case open (02174808) because the Veeam One taskbar icon was showing warnings, but when I clicked on the icon and clicked on Show Alarms, it would bring me to Infrastructure View, but there were no errors. It turns out the errors were in Data Protection View. I was told in the case that this was "by design" which seems a little off to me? I would think it would take me to the warnings? Anyway, they suggested I put a message here about the issue.
Thanks,
Mike
Thanks,
Mike
-
- Novice
- Posts: 5
- Liked: never
- Joined: Oct 19, 2016 7:28 am
- Full Name: shane c
- Contact:
Re: Veeam ONE vNEXT feedback/wishlist
Can the ability for veeam one monitor remember your username instead of having to untick windows session credentials and then having to type out domain and then username every time you open veeam one , This is available on veeam Backup and Replication.
-
- Veteran
- Posts: 7328
- Liked: 781 times
- Joined: May 21, 2014 11:03 am
- Full Name: Nikita Shestakov
- Location: Prague
- Contact:
Re: Veeam ONE vNEXT feedback/wishlist
That sounds like a valid feature request.shane wrote:Can the ability for veeam one monitor remember your username instead of having to untick windows session credentials and then having to type out domain and then username every time you open veeam one , This is available on veeam Backup and Replication.
Do you mean web interface(Reporter, Business View) or desktop one(Monitor)?
-
- Veteran
- Posts: 7328
- Liked: 781 times
- Joined: May 21, 2014 11:03 am
- Full Name: Nikita Shestakov
- Location: Prague
- Contact:
Re: Veeam ONE vNEXT feedback/wishlist
Hi Mike and welcome to the community!mikewachholz wrote:I had a case open (02174808) because the Veeam One taskbar icon was showing warnings, but when I clicked on the icon and clicked on Show Alarms, it would bring me to Infrastructure View, but there were no errors. It turns out the errors were in Data Protection View. I was told in the case that this was "by design" which seems a little off to me? I would think it would take me to the warnings? Anyway, they suggested I put a message here about the issue.
Thanks, Mike
I`ve just confirmed that it works same way in my lab and that`s bug, not design. We will fix it in next product version.
Thanks for the heads up!
-
- Novice
- Posts: 5
- Liked: never
- Joined: Oct 19, 2016 7:28 am
- Full Name: shane c
- Contact:
Re: Veeam ONE vNEXT feedback/wishlist
Monitor on desktopShestakov wrote:That sounds like a valid feature request.
Do you mean web interface(Reporter, Business View) or desktop one(Monitor)?
-
- Veteran
- Posts: 7328
- Liked: 781 times
- Joined: May 21, 2014 11:03 am
- Full Name: Nikita Shestakov
- Location: Prague
- Contact:
Re: Veeam ONE vNEXT feedback/wishlist
Got it. Thank you for the feature request!
-
- Lurker
- Posts: 2
- Liked: never
- Joined: Mar 06, 2017 5:00 pm
- Full Name: Mike Wachholz
- Contact:
Re: Veeam ONE vNEXT feedback/wishlist
Awesome! Thanks for the response!Shestakov wrote:Hi Mike and welcome to the community!
I`ve just confirmed that it works same way in my lab and that`s bug, not design. We will fix it in next product version.
Thanks for the heads up!
-
- Influencer
- Posts: 20
- Liked: 2 times
- Joined: Sep 22, 2016 7:15 am
- Full Name: mcourtney
- Contact:
Re: Veeam ONE vNEXT feedback/wishlist
The chargeback/showback reports that were added to Veeam ONE are fantastic! It would be great if another report could be added to meter/bill NSX Edge appliances, this would be particularly useful for vCloud Director SPs.
Things I'd like to report/bill on:
Things I'd like to report/bill on:
- NSX Edge Appliance Size
- HA Enabled?
- Public IP address consumption
- Traffic traversing the outside interface
-
- VP, Product Management
- Posts: 27377
- Liked: 2800 times
- Joined: Mar 30, 2009 9:13 am
- Full Name: Vitaliy Safarov
- Contact:
Re: Veeam ONE vNEXT feedback/wishlist
Good start, you're the first one to say exactly what he wants for NSX monitoring, reporting feature, thank for that!:) We've spoken to many customers who said we need everything...
-
- Influencer
- Posts: 12
- Liked: never
- Joined: May 27, 2015 7:27 am
- Full Name: Jens Pohl
- Contact:
Re: Veeam ONE vNEXT feedback/wishlist
Could you add some minimum Values for CPU Cores and GB of RAM for the "Oversized VMs" Report?
The Information that a Windows 2012 R2 Server should run with 1 CPU und 1,3GB RAM might be technical correct, but you cant do anything interactive on a Server like this.
Jens
The Information that a Windows 2012 R2 Server should run with 1 CPU und 1,3GB RAM might be technical correct, but you cant do anything interactive on a Server like this.
Jens
-
- Veteran
- Posts: 7328
- Liked: 781 times
- Joined: May 21, 2014 11:03 am
- Full Name: Nikita Shestakov
- Location: Prague
- Contact:
Re: Veeam ONE vNEXT feedback/wishlist
Hello Jens,
That`s a valid request, we will think about avoiding recommendations below minimal Microsoft Windows recommendation.
Thanks!
That`s a valid request, we will think about avoiding recommendations below minimal Microsoft Windows recommendation.
Thanks!
-
- Lurker
- Posts: 2
- Liked: never
- Joined: Jul 24, 2017 6:34 pm
- Full Name: David Wolf
- Contact:
Re: Veeam ONE vNEXT feedback/wishlist
Will there ever be a Visio template for the Hosts and showing what VM's are attached them the Hosts?
-
- Veteran
- Posts: 7328
- Liked: 781 times
- Joined: May 21, 2014 11:03 am
- Full Name: Nikita Shestakov
- Location: Prague
- Contact:
Re: Veeam ONE vNEXT feedback/wishlist
Hello David,
There is Infrastructure Overview (Visio) report where you can go to VMware Configuration section and review VMs under hosts.
Thanks!
There is Infrastructure Overview (Visio) report where you can go to VMware Configuration section and review VMs under hosts.
Thanks!
-
- Influencer
- Posts: 22
- Liked: 4 times
- Joined: May 19, 2017 11:51 am
- Full Name: JMM
- Contact:
Re: Veeam ONE vNEXT feedback/wishlist
Hi, i put a feature request there : [feature request] No link to the "VM Guest Disk SPACE Usage
but i have noticed that this thread may be more accurate ...
This is just a simple shortcut to the detailled by VM report "VM Guest Disk SPACE Usage " :
It will be more convenient to have the report "VM Guest Disk SPACE Usage " directly inside VEEAM monitor console : I identify my VM, right click on it : "Reports"/VM/ -> "VM Guest Disk SPACE Usage "
But in place of that the only report we can click on is " Guest Disk Free Space" --> that report is per "infrastructure" view not per VM ... --> so we go to page 2 of that report / find our VM (if neither...) and next click on the VM name to finally get per VM "Guest Disk SPACE Usage."
but i have noticed that this thread may be more accurate ...
This is just a simple shortcut to the detailled by VM report "VM Guest Disk SPACE Usage " :
It will be more convenient to have the report "VM Guest Disk SPACE Usage " directly inside VEEAM monitor console : I identify my VM, right click on it : "Reports"/VM/ -> "VM Guest Disk SPACE Usage "
But in place of that the only report we can click on is " Guest Disk Free Space" --> that report is per "infrastructure" view not per VM ... --> so we go to page 2 of that report / find our VM (if neither...) and next click on the VM name to finally get per VM "Guest Disk SPACE Usage."
-
- VP, Product Management
- Posts: 27377
- Liked: 2800 times
- Joined: Mar 30, 2009 9:13 am
- Full Name: Vitaliy Safarov
- Contact:
Re: Veeam ONE vNEXT feedback/wishlist
Separate threads are always better, cause this topic starts to be confusing and hard to follow when different features are discussed.
Re: Veeam ONE vNEXT feedback/wishlist
On my wishlist for Veeam ONE is the following:
Detecting/Reporting virtual machines that have the disk format "Thick-Provision Lazy-Zeroed" and/or "Thick-Provision Eager-Zeroed" and not only "Virtual Disk: Is thin provisioned", because [is not] "thin provisioned" means only thick provisioned, but not concretely Lazy or Eager.
Please implement this function into a future version of Veeam ONE.
Thank you.
Detecting/Reporting virtual machines that have the disk format "Thick-Provision Lazy-Zeroed" and/or "Thick-Provision Eager-Zeroed" and not only "Virtual Disk: Is thin provisioned", because [is not] "thin provisioned" means only thick provisioned, but not concretely Lazy or Eager.
Please implement this function into a future version of Veeam ONE.
Thank you.
-
- Veteran
- Posts: 7328
- Liked: 781 times
- Joined: May 21, 2014 11:03 am
- Full Name: Nikita Shestakov
- Location: Prague
- Contact:
Re: Veeam ONE vNEXT feedback/wishlist
Hello Michael and welcome to the community!
I like the idea, will discuss it with developers.
Could you describe your use case? Do you need it in Custom Infrastructure report?
Thanks!
I like the idea, will discuss it with developers.
Could you describe your use case? Do you need it in Custom Infrastructure report?
Thanks!
-
- Lurker
- Posts: 1
- Liked: never
- Joined: Dec 01, 2017 2:01 pm
- Full Name: Aram Avetisyan
- Contact:
Re: Veeam ONE vNEXT feedback/wishlist
Hey, Good idea on integrating Runecast, any update on that?
-
- Veteran
- Posts: 7328
- Liked: 781 times
- Joined: May 21, 2014 11:03 am
- Full Name: Nikita Shestakov
- Location: Prague
- Contact:
Re: Veeam ONE vNEXT feedback/wishlist
Hi Aram and welcome to the community!
Are you referring to this post?
We are working on a related feature for Backup Infrastructure monitoring for future releases. As for vSphere/Hyper-V, we add more checks to the assessment reports.
Are you referring to this post?
We are working on a related feature for Backup Infrastructure monitoring for future releases. As for vSphere/Hyper-V, we add more checks to the assessment reports.
Re: Veeam ONE vNEXT feedback/wishlist
Hello Nikita,Shestakov wrote:Hello Michael and welcome to the community!
I like the idea, will discuss it with developers.
Could you describe your use case? Do you need it in Custom Infrastructure report?
Thanks!
We have a HPE 3PAR Storage System. Using only "Thick-Provision Eager-Zeroed" disks guarantees maximum performance.
Because we converted a lot of physical machines (back in the days), and the VMware vCenter Converter doesn't provide the disk converting option "Thick-Provision Eager-Zeroed", we have to convert the disks afterwards with the help of Storage vMotion.
I don't want to check every single VM (converted or existing/migrated VM from older ESX hosts) if it has disks that are not "Thick-Provision Eager-Zeroed".
My idea was to build a report with Veaam ONE for doing this query now and in future, but the functionality is not yet available
-
- Veteran
- Posts: 7328
- Liked: 781 times
- Joined: May 21, 2014 11:03 am
- Full Name: Nikita Shestakov
- Location: Prague
- Contact:
Re: Veeam ONE vNEXT feedback/wishlist
Got it, thanks for the explanation.
I will add the enhancement to the road map.
I will add the enhancement to the road map.
-
- Veteran
- Posts: 385
- Liked: 39 times
- Joined: Oct 17, 2013 10:02 am
- Full Name: Mark
- Location: UK
- Contact:
Re: Veeam ONE vNEXT feedback/wishlist
Can I request a feature please.
When looking at individual VM Summary Tabs, is it possible to display any Tags and Annotations of the VM ?
At the moment, when I get an alarm, I also have to go into vcenter to see who actually owns that VM.
It would be helpful.
Thanks
When looking at individual VM Summary Tabs, is it possible to display any Tags and Annotations of the VM ?
At the moment, when I get an alarm, I also have to go into vcenter to see who actually owns that VM.
It would be helpful.
Thanks
-
- Veteran
- Posts: 7328
- Liked: 781 times
- Joined: May 21, 2014 11:03 am
- Full Name: Nikita Shestakov
- Location: Prague
- Contact:
Re: Veeam ONE vNEXT feedback/wishlist
Hello Mark,
What if we add the info in tooltip?
As for summary, we are planning to show business view groups and categories.
What if we add the info in tooltip?
As for summary, we are planning to show business view groups and categories.
-
- Veteran
- Posts: 385
- Liked: 39 times
- Joined: Oct 17, 2013 10:02 am
- Full Name: Mark
- Location: UK
- Contact:
Re: Veeam ONE vNEXT feedback/wishlist
AH, I was wondering what a tooltip was and then I just saw it... you already added it It would be better on the Summary, but now I know where to look, it helps.Shestakov wrote:Hello Mark,
What if we add the info in tooltip?
As for summary, we are planning to show business view groups and categories.
cheers
-
- Veteran
- Posts: 7328
- Liked: 781 times
- Joined: May 21, 2014 11:03 am
- Full Name: Nikita Shestakov
- Location: Prague
- Contact:
Re: Veeam ONE vNEXT feedback/wishlist
Yeah, I knew it should be there
Why is it better to have it in summary? Do you want to highlight and copy it?
Thanks!
Why is it better to have it in summary? Do you want to highlight and copy it?
Thanks!
-
- Veteran
- Posts: 385
- Liked: 39 times
- Joined: Oct 17, 2013 10:02 am
- Full Name: Mark
- Location: UK
- Contact:
Re: Veeam ONE vNEXT feedback/wishlist
I might want to screenshot that summary screen and send it to someone.Shestakov wrote:Yeah, I knew it should be there
Why is it better to have it in summary? Do you want to highlight and copy it?
Thanks!
There seems like a lot of usable space that is taken up by the Latest Alarms box, that could be used for something else. If someone has enough Alarms to fill that big box, they are in trouble!
-
- Veteran
- Posts: 7328
- Liked: 781 times
- Joined: May 21, 2014 11:03 am
- Full Name: Nikita Shestakov
- Location: Prague
- Contact:
Re: Veeam ONE vNEXT feedback/wishlist
Thanks for the explanation.
You can still take a screenshot of the tooltip.
As for changes in Summary, as I mentioned, we are planning to show business view groups and categories and customers synchronize BV groups with vSphere tags, so for them showing tags in Summary is duplication.
You can still take a screenshot of the tooltip.
As for changes in Summary, as I mentioned, we are planning to show business view groups and categories and customers synchronize BV groups with vSphere tags, so for them showing tags in Summary is duplication.
Who is online
Users browsing this forum: No registered users and 9 guests