Comprehensive data protection for all workloads
Post Reply
clocatel
Novice
Posts: 3
Liked: never
Joined: Feb 18, 2010 2:59 pm
Full Name: Cedric Locatelli
Contact:

Restoring VMs with vStorage API

Post by clocatel »

Hello
I didn't find in guides if VEEAM backup could restore VMs on FC. Neither in the FAQ.
Could someone tell me the answer ?

Cedric.
Gostev
Chief Product Officer
Posts: 31804
Liked: 7298 times
Joined: Jan 01, 2006 1:01 am
Location: Baar, Switzerland
Contact:

Re: Restoring VMs with vStorage API

Post by Gostev »

Hello Cedric, in the current version full image restores are not direct to SAN, they are performed through connection to the ESX host. Thank you!
fgw
Enthusiast
Posts: 85
Liked: 2 times
Joined: Jun 11, 2009 8:39 pm
Full Name: Franz Glatzer
Contact:

Re: Restoring VMs with vStorage API

Post by fgw »

anton, i already asked this in another thread, but as it perfectly fits here:

is veeam working on a solution to restore directly to san without going through an esx server?

dont know if this is even possible by the storage api?

would this be possible but it is not yet implemented, or would this not be possible at all?
maxbbs
Novice
Posts: 6
Liked: 1 time
Joined: Nov 19, 2009 11:03 pm
Full Name: Max Edwards
Contact:

Re: Restoring VMs with vStorage API

Post by maxbbs »

Hi

I am trying to achieve a solution that can leverage LAN-free restore.

I am wondering if the following example configuration would work:

I have a 5 node ESX cluster with one shared datastore - Datastore1
I add another (backup) node to the cluster and give it access to Datastore1 via LUN masking etc.
I add a chunk of 'private' direct attached storage to this backup node. I create a datastore called 'backups' on this private storage.

So my backup node will be a part of the cluster the same as all the other hosts, but it will also have a large vmfs 'private' backups area.

If I then perform backups using the SAN option (with or without vStorageAPI), using the 'backups' volume as a target. This of course will be LAN free.

If I restore a VM from the 'backups' vmfs to the 'Datastore1' vmfs (is this possible on the same host?) - This will effectively be LAN free? Would all data be pushed through the (local) SC connection (still technically LAN free but possible big performance hit)?

If I restored a VM from the 'backups' vmfs to the 'Datastore1' vmfs but specify a different host in the same cluster during this operation, will this use the network stack/SC connection?

Am I barking up the wrong tree here? If so, would the virtual appliance (on the backup host) using the 'backup' datastore as a target give me a better result?


Thanks for any comments/thoughts


Max
Gostev
Chief Product Officer
Posts: 31804
Liked: 7298 times
Joined: Jan 01, 2006 1:01 am
Location: Baar, Switzerland
Contact:

Re: Restoring VMs with vStorage API

Post by Gostev »

maxbbs wrote:If I restore a VM from the 'backups' vmfs to the 'Datastore1' vmfs (is this possible on the same host?) - This will effectively be LAN free?
Yes, in case with "fat" ESX restores are effectively LAN-free in this scenario (I assume both 'backups' vmfs and 'Datastore1' vmfs are connected to ESX).
maxbbs wrote:Would all data be pushed through the (local) SC connection (still technically LAN free but possible big performance hit)?
Correct, all data is pushed through the (local) SC connection. There should not be performance hit though.
maxbbs wrote:If I restored a VM from the 'backups' vmfs to the 'Datastore1' vmfs but specify a different host in the same cluster during this operation, will this use the network stack/SC connection?
Correct. Network stack will be used in all cases.
maxbbs
Novice
Posts: 6
Liked: 1 time
Joined: Nov 19, 2009 11:03 pm
Full Name: Max Edwards
Contact:

Re: Restoring VMs with vStorage API

Post by maxbbs »

Ok, thanks very much :)
jeromyhensley
Influencer
Posts: 16
Liked: never
Joined: Jan 07, 2011 8:50 pm
Full Name: Jeromy Hensley
Contact:

Full VM Restore Question

Post by jeromyhensley »

[merged with existing discussion]

I have a physical server that I have Veeam BR installed on. The server has two NICs, one for the corporate LAN and one for iSCSI to communicate with our production SAN. Now I have my backup jobs configured to use the iSCSI NIC for performing backups.

One thing I noticed when performing a full VM restore is that Veeam BR was using the corporate LAN nic for sending out data during the full VM restore.

Why was Veeam BR utitlizing the NIC that the corporate LAN uses instead of the NIC that's used for iSCSI?.....Heh I think I just figured out my answer.

Since the server I'm using is server 2008 and utilizing the microsoft iSCSI initiator the server has read-only access to the SAN. Which is why it's utilizing the corporate LAN for the restore and not the iSCSI LAN. Can anyone verify this?
Vitaliy S.
VP, Product Management
Posts: 27371
Liked: 2799 times
Joined: Mar 30, 2009 9:13 am
Full Name: Vitaliy Safarov
Contact:

Re: Restoring VMs with vStorage API

Post by Vitaliy S. »

jeromyhensley wrote:Since the server I'm using is server 2008 and utilizing the microsoft iSCSI initiator the server has read-only access to the SAN. Which is why it's utilizing the corporate LAN for the restore and not the iSCSI LAN. Can anyone verify this?
Jeromy, giving write permission to your SAN LUN wouldn't help here, as all restores are performed via host network stack right now.
mpozar
Influencer
Posts: 24
Liked: 2 times
Joined: Jan 01, 2006 1:01 am
Contact:

Re: Restoring VMs with vStorage API

Post by mpozar »

When will Veeam provide restores via FC? It seems that vRanger 5 now provides this capability for restores. We are a Veeam reseller in Australia and we've had a few potential customers now ask about this capability/

Have FUN!

Michael Pozar
Vitaliy S.
VP, Product Management
Posts: 27371
Liked: 2799 times
Joined: Mar 30, 2009 9:13 am
Full Name: Vitaliy Safarov
Contact:

Re: Restoring VMs with vStorage API

Post by Vitaliy S. »

Michael, we are investigating a possibility of adding such functionality to the product, but, unfortunately, right now there are some concerns related to vStorage API architecture. For more information please have a look at this post: Two things I hoped was to be in VB&R 5
jeromyhensley
Influencer
Posts: 16
Liked: never
Joined: Jan 07, 2011 8:50 pm
Full Name: Jeromy Hensley
Contact:

Re: Restoring VMs with vStorage API

Post by jeromyhensley »

Vitaliy, thanks for the response.
m.novelli
Veeam ProPartner
Posts: 564
Liked: 103 times
Joined: Dec 29, 2009 12:48 pm
Full Name: Marco Novelli
Location: Asti - Italy
Contact:

Direct restore to SAN

Post by m.novelli »

[merged into existing discussion]

Any timeframe for direct restore to SAN?
Yesterday I had to restore a 600 GB VM to ESXi 4.1 for DR testing purpouses
Full backup took 1.45h , restore took 20 hours :(

Marco
slidek9
Enthusiast
Posts: 44
Liked: never
Joined: Apr 20, 2010 5:00 pm
Full Name: Leon
Contact:

Restoring VM via SAN

Post by slidek9 »

[merged into existing discussion]

Hiya,

Sorry if this is asked a lot.

Is it possible to do a VM guest restore via SAN with B+R v5 (as I can't find the option)?

Thanks!
Gostev
Chief Product Officer
Posts: 31804
Liked: 7298 times
Joined: Jan 01, 2006 1:01 am
Location: Baar, Switzerland
Contact:

Re: Direct restore to SAN

Post by Gostev »

m.novelli wrote:Yesterday I had to restore a 600 GB VM to ESXi 4.1 for DR testing purpouses
Full backup took 1.45h , restore took 20 hours :(
You can use Instant VM Recovery to restore VM in less than 1 min... available in every Veeam Backup edition.
KiwiJJ
Expert
Posts: 105
Liked: 2 times
Joined: Feb 16, 2010 8:05 pm
Full Name: John Jones
Location: New Zealand

Very Slow Full VM Restore

Post by KiwiJJ »

[merged into existing discussion]

Hi,
For our disaster recovery we purchased a new Host and a new workstation.
I have installed Veeam Backup 5.0.2 onto the workstation which runs Windows 7.
The host is running ESXi 4.1 Update 1
The backup files are stored on a USB Hard Drive
When testing full VM restores I am getting a maximum restore speed of 2 MB/S. At this rate it would take days to restore our 2 TB's of data / VM's

Any idea why this would be so slow ?

Any ideas on how I can get our systems back up faster in a disaster recovery situation ?
One scenario I can think of would be to install vCenter Server on the workstation.
Use Instant VM Recovery and then use vCenter to move the datastores.
How would this work running a bunch of VM's off the USB hard drive, I assume they would be very slow ?

thanks,

John
simeonh
Influencer
Posts: 11
Liked: never
Joined: Apr 11, 2010 11:10 pm
Full Name: Simeon Hemus
Contact:

Re: Restoring VMs with vStorage API

Post by simeonh »

Restoring via the Network is such a ridiculous idea! it so slow.
i'm sure the restores in the previous versions of veeam were much faster. has this limitation only been added for Veeam v5? If it doesn't get fixed we may have to look into other backup software, because restoring quickly is pretty critical!
Vitaliy S.
VP, Product Management
Posts: 27371
Liked: 2799 times
Joined: Mar 30, 2009 9:13 am
Full Name: Vitaliy Safarov
Contact:

Re: Restoring VMs with vStorage API

Post by Vitaliy S. »

Simeon, no changes were introduced to the restore engine, it is still the same. Try to upload any file with vSphere Client - Datastore Browser and you'll see what speeds you should expect with your hardware and hosts version. Please note that restoring to ESX host with service console credentials specified will make the restore quicker.

As for direct SAN restores, please look through this post. On top of that, have you considered using Instant VM Recovery to get your production back to the running state?
Vitaliy S.
VP, Product Management
Posts: 27371
Liked: 2799 times
Joined: Mar 30, 2009 9:13 am
Full Name: Vitaliy Safarov
Contact:

Re: Restoring VMs with vStorage API

Post by Vitaliy S. »

KiwiJJ wrote:When testing full VM restores I am getting a maximum restore speed of 2 MB/S. At this rate it would take days to restore our 2 TB's of data / VM's

Any idea why this would be so slow ?
Could you please tell me what performance rates do you get while uploading any file from the same USB drive via vSphere Client -> Datastore Browser?
KiwiJJ wrote:Any ideas on how I can get our systems back up faster in a disaster recovery situation ?
One scenario I can think of would be to install vCenter Server on the workstation.
Use Instant VM Recovery and then use vCenter to move the datastores.
Yes, in order to bring all VMs back to a production environment much faster, I would suggest using Instant VM Recovery, then use either replication job or storage VMotion to relocate those VMs.
KiwiJJ wrote:How would this work running a bunch of VM's off the USB hard drive, I assume they would be very slow?
Yes, it will be slow, however the performance heavily depends on the read/write rates of your USB hard drive.
KiwiJJ
Expert
Posts: 105
Liked: 2 times
Joined: Feb 16, 2010 8:05 pm
Full Name: John Jones
Location: New Zealand

Re: Restoring VMs with vStorage API

Post by KiwiJJ »

Hi Vitaliy,
I found the problem (I thought I was connected to a 1 GB switch but it was a 100MB one) and am now getting restore speeds between 50-150 MB/s.

thanks,

John
Gostev
Chief Product Officer
Posts: 31804
Liked: 7298 times
Joined: Jan 01, 2006 1:01 am
Location: Baar, Switzerland
Contact:

Re: Restoring VMs with vStorage API

Post by Gostev »

This is by far most common cause for performance issues. In your case this was easy to spot, however what often happens in other cases is ports failing over from 1Gb to 100Mb for good (cabling issues) or no good (some weird port defect) reason. Glad you managed to nail this down reasonably fast. Thanks for taking time to update this thread with the resolution.
ca107
Lurker
Posts: 2
Liked: never
Joined: Apr 26, 2011 6:56 pm
Contact:

Re: Restoring VMs with vStorage API

Post by ca107 »

@Marco

were you able to improve your restore speed?
m.novelli
Veeam ProPartner
Posts: 564
Liked: 103 times
Joined: Dec 29, 2009 12:48 pm
Full Name: Marco Novelli
Location: Asti - Italy
Contact:

Re: Restoring VMs with vStorage API

Post by m.novelli »

ca107 wrote:@Marco

were you able to improve your restore speed?
Not using traditional Veeam Restore metod, it's still via network and so slow (but this is an ESXi issue).

Using Instant Recovery the DR test is lightning fast, but then you need to Storage vMotion the VM to production infrastructure

I hope for FC and iSCSI direct restore for next major release

Marco
Gostev
Chief Product Officer
Posts: 31804
Liked: 7298 times
Joined: Jan 01, 2006 1:01 am
Location: Baar, Switzerland
Contact:

Re: Restoring VMs with vStorage API

Post by Gostev »

m.novelli wrote:I hope for FC and iSCSI direct restore for next major release
See link to the corresponding discussion topic just a few posts above.
Post Reply

Who is online

Users browsing this forum: Bing [Bot], Google [Bot], Semrush [Bot] and 150 guests