Discussions related to exporting backups to tape and backing up directly to tape.
Dima P.
Product Manager
Posts: 14396
Liked: 1568 times
Joined: Feb 04, 2013 2:07 pm
Full Name: Dmitry Popov
Location: Prague
Contact:

Re: v9 - Failed to get media info

Post by Dima P. »

If there is no option in UI installer its worth unpacking the setup with WinZip or WinRAR – in 99% cases ( base on my experience of course) nonexclusive version is inside :wink:
vic.chen
Lurker
Posts: 1
Liked: never
Joined: Feb 06, 2016 10:47 am
Full Name: vic.chen
Contact:

[MERGED] : backup copy job to Tape error

Post by vic.chen »

Hello
I have backup copy job to Tape,
but write to tape 70~90% will fail ,
i have change other tape,but the same error message,

Backup to Disk is ok not error

[veeamser] [TapeService] Failed to Get media info Access is denied. Problem with CreateFile in '\\.\Tape0' --tr:Error code: 0x00000005 Access is denied. Problem with CreateFile in '\\.\Tape0' Access is denied. Problem with CreateFile in '\\.\Tape0' --tr:Error code: 0x00000005

Tape library: IBM 3573-TL C.20 (Local Tape Server)
VEEAM Server : Backup & Replication v9

can anyone how do check this error ? :|
Dima P.
Product Manager
Posts: 14396
Liked: 1568 times
Joined: Feb 04, 2013 2:07 pm
Full Name: Dmitry Popov
Location: Prague
Contact:

Re: backup copy job to Tape error

Post by Dima P. »

Hello vic.chen,

Please include the case ID when reporting about technical issues otherwise your post is going to be deleted. Thanks.
veremin
Product Manager
Posts: 20270
Liked: 2252 times
Joined: Oct 26, 2012 3:28 pm
Full Name: Vladimir Eremin
Contact:

Re: v9 - Failed to get media info

Post by veremin »

can anyone how do check this error ? :|
Have you tried to re-install drivers, using non-exclusive version? Thanks.
ruddolf
Lurker
Posts: 1
Liked: never
Joined: Oct 18, 2013 7:25 pm
Full Name: Rodolfo Montes de Oca Ruiz
Contact:

Re: v9 - Failed to get media info

Post by ruddolf »

Yes, install the non_exclusive.exe drivers and problem solved! (tested using IBM 3573) :D
rhoughton
Novice
Posts: 3
Liked: never
Joined: Jan 20, 2016 9:21 am
Full Name: Richard Houghton
Contact:

[MERGED] V9 Errors writing to Tape - Dell Tl4000

Post by rhoughton »

Case: 01712631

Since upgrading to V9 - we are unable to write to tape backup - first tape works, once it asks for second tape we get the same error.

I have been through the first level and second level - can you check security, can you check services, can you check firmware..

Jumped through the hoops and done all they ask - and no surprise made absolutely no difference.

I have seen articles on Spiceworks with people having the same errors - and reported this back - silence.

Tape1' Access is denied. Problem with CreateFile in '\\.\Tape1' --tr:Error code: 0x00000005
Dima P.
Product Manager
Posts: 14396
Liked: 1568 times
Joined: Feb 04, 2013 2:07 pm
Full Name: Dmitry Popov
Location: Prague
Contact:

Re: v9 - Failed to get media info

Post by Dima P. »

Richard,

Extract the driver’s installation package you got and use the non-exclusive version. That should help.
rhoughton
Novice
Posts: 3
Liked: never
Joined: Jan 20, 2016 9:21 am
Full Name: Richard Houghton
Contact:

Re: v9 - Failed to get media info

Post by rhoughton »

I was using the non-exclusive drivers already with Veeam 8 - and still am with V9.

Support had me do the normal - firmware on drives / robot etc plus check the security / accounts on services - again NOTHING has changed since V8...

So back to next level support now apparently..

Losing confidence
Dima P.
Product Manager
Posts: 14396
Liked: 1568 times
Joined: Feb 04, 2013 2:07 pm
Full Name: Dmitry Popov
Location: Prague
Contact:

Re: v9 - Failed to get media info

Post by Dima P. »

Richard,

Thanks for the heads up. I do see your case has been escalated to the highest level of support and believe me you are know it good hands. Let’s await for the Denis B. investigation results.
egroeg
Enthusiast
Posts: 55
Liked: never
Joined: Sep 23, 2010 2:36 pm
Full Name: George Kenny
Contact:

Re: v9 - Failed to get media info

Post by egroeg »

Hello all.

We're suffering with the same issue using V9 - I recollect using the non-exclusive command string within BUE several years ago.

Can someone (perhaps from Veeam) elaborate on exactly how to install the driver version in this mode - should this be a command instruction from the Tape Vendor (IBM / HP etc)?

Please advise.
Dima P.
Product Manager
Posts: 14396
Liked: 1568 times
Joined: Feb 04, 2013 2:07 pm
Full Name: Dmitry Popov
Location: Prague
Contact:

Re: v9 - Failed to get media info

Post by Dima P. »

George,

What tape device are you using?
giovanni.mantelli
Lurker
Posts: 1
Liked: never
Joined: Dec 21, 2015 1:02 pm
Full Name: Giovanni Mantelli
Contact:

Re: v9 - Failed to get media info

Post by giovanni.mantelli »

Hi guys, how are you?

We are trying the Veeam V9, and we have migrate from V8 to V9 few days ago. The V8 is working correctly. We noticed in the V9 that the Full Backup tape jobs are with bellow issues:

Code: Select all

[TapeService] Failed to Get media info Access is denied. Problem with CreateFile in '\\.\Tape0' --tr:Error code: 0x00000005 Access is denied. 
Incremental backups are working ok

My Case on the veeam support is: #01737622

Thantks a lot!!!
gpontikakos
Novice
Posts: 7
Liked: never
Joined: Jul 15, 2015 11:47 pm
Full Name: George Pontikakos
Contact:

Re: v9 - Failed to get media info

Post by gpontikakos »

jeremy.porter wrote:Hi as per my earlier post at the top of this page I'm reporting back my progress.
The update the 'IBM' drivers for the Dell TL2000 library to NonExclusive mode have worked for me, 6TB of small jobs were successful and starting all the bigger ones now.
I run on the same issue. I downloaded from Dell TL2000TL4000_A13_ZPE.exe which is version 6.2.5.5. After updating the drivers in Device manager the tape drives show as IBM ULTRIUM 6 HH 3580 instead of 3573 that is what is shown in the tape library itself.
Can anyone confirm this is correct? Did I do something wrong?

Thank you in advance
ddayton
Enthusiast
Posts: 45
Liked: 19 times
Joined: Nov 12, 2012 6:40 pm
Full Name: Don Dayton
Contact:

Re: v9 - Failed to get media info

Post by ddayton » 1 person likes this post

When you download the driver for the IBM tape drive you should see an install_readme.txt file. In the file you will see a note:

To install the Windows Server IBMTape Device Drivers:

Double click on install_exclusive.exe or install_nonexclusive.exe to start the
drivers installation or use the command line options as follows:

install_exclusive [-c|-t] [-d] [-s] [-h] [-r]
or
install_nonexclusive [-c|-t] [-d] [-s] [-h] [-r]

c = install only the changer drivers
t = install only the tape drivers
d = output debug information to debug.txt
s = silent mode (suppress IBM driver pop-ups)
r = disable the RSM service
f = disable DPF
p = use persistent reserve if DPF disabled
m = disable media polling
a = disable WRAttributes
h = print usage information
Post Reply

Who is online

Users browsing this forum: No registered users and 20 guests