Domain Controllers fail Surebackup script tests

Availability for the Always-On Enterprise

Re: Domain Controllers fail Surebackup script tests

Veeam Logoby v.Eremin » Mon Nov 07, 2016 8:36 am

grimson wrote:Thanks for the update!
This issue seems to happen more frequent than before, unfortunately I could not troubleshoot it myself (remote client).

What were the results of support investigation? Did you also implement the regkey suggested above? Thanks.
v.Eremin
Veeam Software
 
Posts: 13558
Liked: 1006 times
Joined: Fri Oct 26, 2012 3:28 pm
Full Name: Vladimir Eremin

Re: Domain Controllers fail Surebackup script tests

Veeam Logoby agrob » Mon Nov 07, 2016 8:57 am

since i have implemented the key surebackup works well.
Support told me that setting this key would fix a timing Problem. without this fix, dc boots into ad restore mode which causes this Problem.
agrob
Enthusiast
 
Posts: 91
Liked: 8 times
Joined: Mon Sep 05, 2011 1:31 pm
Full Name: Andre

Re: Domain Controllers fail Surebackup script tests

Veeam Logoby foggy » Mon Nov 07, 2016 1:27 pm

As mentioned in the thread referred to above, Veeam B&R 9.5 will change the logic back, so there're will be no need to use it with the new version.
foggy
Veeam Software
 
Posts: 15087
Liked: 1110 times
Joined: Mon Jul 11, 2011 10:22 am
Full Name: Alexander Fogelson

Re: Domain Controllers fail Surebackup script tests

Veeam Logoby blithespirit » Tue Nov 08, 2016 9:33 am

What version of Veeam Backup & Replication are you using? if V9 then Update 2 has a fix for the netlogon issue.
blithespirit
Veeam Software
 
Posts: 47
Liked: 8 times
Joined: Tue May 03, 2016 2:06 pm
Full Name: Paul Szelsi

Re: Domain Controllers fail Surebackup script tests

Veeam Logoby grimson » Tue Nov 08, 2016 9:40 am

v.Eremin wrote:What were the results of support investigation? Did you also implement the regkey suggested above? Thanks.

No, sorry, 'my case' was before this reg key / fix was mentioned;
At the support stage from Veeam we got to the conclusion that it was stuck in the recovery mode. Therefore had to obtain logs from this stage and had to login the server with the AD recoverymode credentials.
Unfortunately time got to me that further troubleshooting was nog possible (client is not accessible remotely so must do all actions on premises) any further and that a reboot just before the last veeam backup used with surebackup was sufficient at the moment.

My next visit will introduce the fix or Veeam 9.5 will already be available at that moment :).
grimson
Novice
 
Posts: 5
Liked: never
Joined: Thu Jul 28, 2011 8:20 am
Full Name: Arian van der Pijl

Re: Domain Controllers fail Surebackup script tests

Veeam Logoby grimson » Tue Nov 08, 2016 9:44 am

blithespirit wrote:What version of Veeam Backup & Replication are you using? if V9 then Update 2 has a fix for the netlogon issue.

I read that 9u2 introduced a change in logic therefore caused this issue. With the reg fix this changed logic was reversed.
So update 2 is not the fix but the issue here my guess?
9.5 should reverse the logic without the fix must be the conclusion?
grimson
Novice
 
Posts: 5
Liked: never
Joined: Thu Jul 28, 2011 8:20 am
Full Name: Arian van der Pijl

Re: Domain Controllers fail Surebackup script tests

Veeam Logoby foggy » Tue Nov 08, 2016 1:33 pm

Arian, your conclusion is correct.
foggy
Veeam Software
 
Posts: 15087
Liked: 1110 times
Joined: Mon Jul 11, 2011 10:22 am
Full Name: Alexander Fogelson

Previous

Return to Veeam Backup & Replication



Who is online

Users browsing this forum: No registered users and 52 guests