Host-based backup of VMware vSphere VMs.
Locked
Vitaliy S.
VP, Product Management
Posts: 27343
Liked: 2784 times
Joined: Mar 30, 2009 9:13 am
Full Name: Vitaliy Safarov
Contact:

Re: VMware CBT bug KB 2090639

Post by Vitaliy S. »

Changing size of the datastore does not matter, so you're safe here. And yes, you should reset the CBT data and apply the hotfix to workaround this issue. Thanks!
foggy
Veeam Software
Posts: 21133
Liked: 2140 times
Joined: Jul 11, 2011 10:22 am
Full Name: Alexander Fogelson
Contact:

Re: VMware CBT bug KB 2090639

Post by foggy »

...and yes, the described procedure solves the issue for both backups and replicas.
r.mckeon
Enthusiast
Posts: 59
Liked: 2 times
Joined: May 27, 2014 8:25 am
Full Name: Rick McKeon
Contact:

Re: VMware CBT bug KB 2090639

Post by r.mckeon »

Thank you Vitaliy and foggy :)
jbrullemans
Enthusiast
Posts: 45
Liked: 3 times
Joined: Mar 09, 2011 8:22 am
Full Name: John Brullemans
Contact:

Re: VMware CBT bug KB 2090639

Post by jbrullemans »

Hi,

I hav extended a disk in a few month's ago from 350GB to 400GB. At that time i was running Veeam 7. Question 1 and i'm affected by the bug. And currently we are running Veeam V8 if i extend that disk for another 10gb is it than safe to presume that veeam will disable CBT and run a backup and than reanble it again so that i'm safe for the bug?
foggy
Veeam Software
Posts: 21133
Liked: 2140 times
Joined: Jul 11, 2011 10:22 am
Full Name: Alexander Fogelson
Contact:

Re: VMware CBT bug KB 2090639

Post by foggy »

jbrullemans wrote:I hav extended a disk in a few month's ago from 350GB to 400GB. At that time i was running Veeam 7. Question 1 and i'm affected by the bug.
Chances are, you're affected.
jbrullemans wrote:And currently we are running Veeam V8 if i extend that disk for another 10gb is it than safe to presume that veeam will disable CBT and run a backup and than reanble it again so that i'm safe for the bug?
Yes (be ready for the longer job run after that).
ashman70
Expert
Posts: 203
Liked: 12 times
Joined: Dec 04, 2012 2:18 pm
Full Name: Both
Contact:

Re: VMware CBT bug KB 2090639

Post by ashman70 »

I am still confused, if a VM was created with a 200GB partition and then expanded to 250GB, is it vulnerable to this problem?
Is it only when a VM is expanded past 128GB, 256GB or 512GB that it is vulnerable to this problem?
Or does if affect all VM's greater then 128GB regardless of whether they were expanded past 128GB?
Vitaliy S.
VP, Product Management
Posts: 27343
Liked: 2784 times
Joined: Mar 30, 2009 9:13 am
Full Name: Vitaliy Safarov
Contact:

Re: VMware CBT bug KB 2090639

Post by Vitaliy S. »

ashman70 wrote:Is it only when a VM is expanded past 128GB, 256GB or 512GB that it is vulnerable to this problem?
Yes, this is correct according to latest VMware edits to the KB article:
Are virtual machines grown in smaller increments affected?
The amount of space the virtual disk is extended is not relevant, the increment of space by which a virtual disk is extended is not relevant. The virtual machine has this issue when its disk is grown past any 128GB boundary in absolute size. The issue is triggered at other sizes which are a power of 2 from 128GB up. For example: 256GB, 512GB, and 1024GB.
ashman70
Expert
Posts: 203
Liked: 12 times
Joined: Dec 04, 2012 2:18 pm
Full Name: Both
Contact:

Re: VMware CBT bug KB 2090639

Post by ashman70 »

Ok so it looks like we expanded the D drive of a vm from 250GB to 300GB so I assume then that this vdisk is vulnerable to the problem.

I haven't read through many pages in this thread, what is the fix for this specific vm? I am on 5.1 update 2 running Veeam 6.5.1 build 109.
Gostev
Chief Product Officer
Posts: 31746
Liked: 7250 times
Joined: Jan 01, 2006 1:01 am
Location: Baar, Switzerland
Contact:

Re: VMware CBT bug KB 2090639

Post by Gostev »

Hello, KB1940 has all the information about this issue collected.

Basically, there is no solution for 6.5, as this version is no longer supported by our technical support. You need to upgrade to at least 7.0 Patch #4 and apply a hot fix from KB1940, or better yet upgrade directly to 8.0. After that, you should reset CBT on all of your VMs that may have been affected (if unsure, best is to reset CBT on all VMs).

Thanks!
Gostev
Chief Product Officer
Posts: 31746
Liked: 7250 times
Joined: Jan 01, 2006 1:01 am
Location: Baar, Switzerland
Contact:

Re: VMware CBT bug KB 2090639

Post by Gostev »

I will be locking this thread now. If anyone has further questions not covered in the KB article, please either read this thread (as all possible questions have been answered multiple times by now), or just contact our technical support for assistance (if this thread is too long for you to read).
Locked

Who is online

Users browsing this forum: No registered users and 2 guests