Host-based backup of Microsoft Hyper-V VMs.
Post Reply
martin.scott
Novice
Posts: 4
Liked: never
Joined: Sep 25, 2013 10:26 am
Full Name: Martin Scott
Contact:

Hyper-V-VmSwitch Event ID 95 created on each replication

Post by martin.scott »

Hello

I have a set up where I have two server 2012 hyper-v servers. One is used as primary host, the other as failover.
Veeam is set up to replicate the servers on the first one onto the second. Various jobs with various frequencies depending on requirements.

Failover and failback tests indicate all of this works ok.

However on the failover server I get a Hyper-V-VmSwitch error - event id 95 (The VLAN configuration being set on port 4762DBF3-67D0-44B7-8251-483D54471086 (Friendly Name: Virtual Machines_External) on switch CA089C91-F23D-4924-B7FD-A31FECD77829 (Friendly Name: Virtual Machines) is invalid. Reason: VLAN settings other than Access VLAN Id must be zero)
every single time replication begins.

I cant find any hints anywhere about this error(eventid.net, google, TechNet, here) but as we run a continual replication for one particular server, the event log is just filling up with it.

Ive tried removing the relevant switch from hyper v and recreating it precisely as it is on the primary host server. And checked all settings to see if they look the same both on the switch and the network section on the hyper v console for the servers in question. All without any success.

Any help or suggestions would be gratefully received!
Vitaliy S.
VP, Product Management
Posts: 27055
Liked: 2710 times
Joined: Mar 30, 2009 9:13 am
Full Name: Vitaliy Safarov
Contact:

Re: Hyper-V-VmSwitch Event ID 95 created on each replication

Post by Vitaliy S. »

Hi Martin,

Do you have the same issue if you replicate any VM back to the production host? I will consult with our dev team on the event you see, meanwhile can you please open a support case, so we could check where this mapping comes from? Additionally, do you see any other related events on the DR host?

Thanks!
martin.scott
Novice
Posts: 4
Liked: never
Joined: Sep 25, 2013 10:26 am
Full Name: Martin Scott
Contact:

Re: Hyper-V-VmSwitch Event ID 95 created on each replication

Post by martin.scott »

I dont get the same thing on failbacks but I havent replicated any VMs from the failover host to the live one. Ill set something up to check that in a little while.
There are no particularly related events in the logs. Just page after page of the this one

There is a another Hyper-V-VmSwitch Event ID 75 (The operation 'Get Stats' failed on port 16543142-08D9-4603-AF2D-081FF2F4F5E4 (Friendly Name: ) on switch CA089C91-F23D-4924-B7FD-A31FECD77829 (Friendly Name: Virtual Machines). Status = A non close operation has been requested of a file object with a delete pending..) but I havent started looking into that, but I dont think its related. I think thats a separate issue.
Vitaliy S.
VP, Product Management
Posts: 27055
Liked: 2710 times
Joined: Mar 30, 2009 9:13 am
Full Name: Vitaliy Safarov
Contact:

Re: Hyper-V-VmSwitch Event ID 95 created on each replication

Post by Vitaliy S. »

Yes, could be. Can you please update this topic with your case ID after you run a replication job back to the prod host?
martin.scott
Novice
Posts: 4
Liked: never
Joined: Sep 25, 2013 10:26 am
Full Name: Martin Scott
Contact:

Re: Hyper-V-VmSwitch Event ID 95 created on each replication

Post by martin.scott »

The support number is 00692307

I am unable to run a replication job from the failover to the production host. I keep getting the error, not enough licences.
Vitaliy S.
VP, Product Management
Posts: 27055
Liked: 2710 times
Joined: Mar 30, 2009 9:13 am
Full Name: Vitaliy Safarov
Contact:

Re: Hyper-V-VmSwitch Event ID 95 created on each replication

Post by Vitaliy S. »

Ah... yes :) you need more sockets to protect another host. Thanks for the case ID.
Justin_Beswick
Lurker
Posts: 1
Liked: never
Joined: Mar 19, 2015 9:45 am
Full Name: Justin Beswick
Contact:

Re: Hyper-V-VmSwitch Event ID 95 created on each replication

Post by Justin_Beswick »

Hi was there ever a resolution to this, I'm getting a similar issue. All Failovers, failbacks and migrations work, however I get the below issue with Veeam

The operation 'Get Stats' failed on port <ID> (Friendly Name: ) on switch <ID>Friendly Name: LAN Switch). Status = A non close operation has been requested of a file object with a delete pending..
Vitaliy S.
VP, Product Management
Posts: 27055
Liked: 2710 times
Joined: Mar 30, 2009 9:13 am
Full Name: Vitaliy Safarov
Contact:

Re: Hyper-V-VmSwitch Event ID 95 created on each replication

Post by Vitaliy S. »

Our support team has provided a hotfix for this problem, so please contact them directly to obtain it and give a reference to this case ID 00692307 in your email. Thanks!
martin.scott
Novice
Posts: 4
Liked: never
Joined: Sep 25, 2013 10:26 am
Full Name: Martin Scott
Contact:

Re: Hyper-V-VmSwitch Event ID 95 created on each replication

Post by martin.scott »

awesome, thanks :D
micheldb
Lurker
Posts: 1
Liked: never
Joined: Jun 03, 2015 5:40 am
Full Name: Michel
Contact:

Re: Hyper-V-VmSwitch Event ID 95 created on each replication

Post by micheldb »

Hi, I have the same issue with EventID 75
The operation 'Get Stats' failed on port <ID> (Friendly Name: ) on switch <ID>Friendly Name: LAN Switch). Status = A non close operation has been requested of a file object with a delete pending..
This seems to happen if the Hyper-V server is very busy.....
foggy
Veeam Software
Posts: 21069
Liked: 2115 times
Joined: Jul 11, 2011 10:22 am
Full Name: Alexander Fogelson
Contact:

Re: Hyper-V-VmSwitch Event ID 95 created on each replication

Post by foggy »

Michel, please contact technical support for a hotfix mentioned above.
valentin.ciobanu
Influencer
Posts: 11
Liked: 1 time
Joined: May 09, 2016 5:49 pm
Full Name: Valentin Ciobanu
Location: Romania
Contact:

Re: Hyper-V-VmSwitch Event ID 95 created on each replication

Post by valentin.ciobanu »

Hi There ,

We encounter this kind of error but strangely we only have backups and no replication jobs.
Does anyone know if this issue is truly related to Veeam ?

Thanks 1
veremin
Product Manager
Posts: 20270
Liked: 2252 times
Joined: Oct 26, 2012 3:28 pm
Full Name: Vladimir Eremin
Contact:

Re: Hyper-V-VmSwitch Event ID 95 created on each replication

Post by veremin »

It's been over three years since the last reply in this thread, so, we cannot say reliably whether the issue experienced is similar to the one discussed here.

Kindly, open a ticket with our support team for further investigation.

Thanks.
Post Reply

Who is online

Users browsing this forum: No registered users and 32 guests