Discussions related to exporting backups to tape and backing up directly to tape.
Post Reply
jfnk1ng
Influencer
Posts: 18
Liked: never
Joined: Feb 07, 2018 3:26 pm
Full Name: Jeremy King
Contact:

LTO8 Capacity

Post by jfnk1ng »

Hi

Just installed an LTO-8 drive and starting the process of inventorying and cataloguing tapes. I notice the tape capacity is shown as 10.4TB, as compared to the quoted LTO-8 raw capacity of 12.8TB. Is this expected, or is there something I can do within Veeam to increase the available capacity?

Thanks
DGrinev
Veteran
Posts: 1943
Liked: 247 times
Joined: Dec 01, 2016 3:49 pm
Full Name: Dmitry Grinev
Location: St.Petersburg
Contact:

Re: LTO8 Capacity

Post by DGrinev »

Hi Jeremy,

Can you check what capacity is shown in the tape library interface?
I am almost sure that Veeam B&R shows you the value from the library and there is nothing we can do to increase the capacity. Thanks!
veremin
Product Manager
Posts: 20270
Liked: 2252 times
Joined: Oct 26, 2012 3:28 pm
Full Name: Vladimir Eremin
Contact:

Re: LTO8 Capacity

Post by veremin »

Indeed, while estimating tape free space, backup server relies on information provided by drive or library.

So, if free space value is not reflected correctly, then, it might be worth checking tape device firmware, patches, etc.

Thanks.
jfnk1ng
Influencer
Posts: 18
Liked: never
Joined: Feb 07, 2018 3:26 pm
Full Name: Jeremy King
Contact:

Re: LTO8 Capacity

Post by jfnk1ng »

Thanks Dmitry and Vladimir

I have had a look at the vendor-provided dashboard on the server and it reports that the inserted tape has the full 12TB capacity. This still points to your suggested cause of either the info that the server is passing to Veeam, or perhaps how Veeam is interpreting that info. LTO-8 is still pretty new (the Quantum drive we are using was the first we could find that was commercially available) so I can understand that vendor and/or Veeam software may need tweaking, but hard to know where/how to escalate this.

Thanks
Jeremy
DGrinev
Veteran
Posts: 1943
Liked: 247 times
Joined: Dec 01, 2016 3:49 pm
Full Name: Dmitry Grinev
Location: St.Petersburg
Contact:

Re: LTO8 Capacity

Post by DGrinev »

Hi Jeremy,

I did some research and according to the IBM knowledge base capacity of LTO-8 is 12TB, but only 11TB are usable.
Thus, I believe you see the real value of 10.8TB. Thanks!
jfnk1ng
Influencer
Posts: 18
Liked: never
Joined: Feb 07, 2018 3:26 pm
Full Name: Jeremy King
Contact:

Re: LTO8 Capacity

Post by jfnk1ng »

Thanks Dmitry

Not 100% convinced by this. I can certainly believe you don't get the full 12TB (in spite of what the dashboard tells me), but the actual figure quoted in the Knowledgebase article is 11.18TB and Veeam is telling me 10.4TB. That's still a fair chunk missing, so there must be something else at work too.

Thanks
Jeremy
Dima P.
Product Manager
Posts: 14396
Liked: 1568 times
Joined: Feb 04, 2013 2:07 pm
Full Name: Dmitry Popov
Location: Prague
Contact:

Re: LTO8 Capacity

Post by Dima P. »

Hello Jeremy.

Veeam B&R uses the metrics received from tape media (we read it’s chip). This information is used to estimate the tape size, free space, end of media etc. If you have an option, please open a case with your device vendor regarding the tape media capacity and let us know if you need any assistance from our side. Thank you.
jfnk1ng
Influencer
Posts: 18
Liked: never
Joined: Feb 07, 2018 3:26 pm
Full Name: Jeremy King
Contact:

Re: LTO8 Capacity

Post by jfnk1ng »

Thanks Dmitry

Not experienced Quantum support before, but I'll see what I can do...
Lunatic Magnet
Influencer
Posts: 17
Liked: 3 times
Joined: Oct 18, 2017 6:40 pm
Contact:

Re: LTO8 Capacity

Post by Lunatic Magnet »

DGrinev wrote:Hi Jeremy,

I did some research and according to the IBM knowledge base capacity of LTO-8 is 12TB, but only 11TB are usable.
Thus, I believe you see the real value of 10.8TB. Thanks!
I have a Dell TL1000 LTO-8 library with the latest firmware (April 10 2018) and tapes are showing 10.9TB capacity. Looking at some older LTO-6 tapes which have 2.5TB raw, they come up as 2.3TB in Veeam. 2.3TB is 88.46% of the raw capacity. 10.9TB is 90.83% of the raw capacity.

I'd say that's pretty close, but unfortunately like the usable size of hard drives, the larger the tape capacity the more you lose. :x
tsightler
VP, Product Management
Posts: 6009
Liked: 2843 times
Joined: Jun 05, 2009 12:57 pm
Full Name: Tom Sightler
Contact:

Re: LTO8 Capacity

Post by tsightler » 2 people like this post

Lunatic Magnet wrote:I have a Dell TL1000 LTO-8 library with the latest firmware (April 10 2018) and tapes are showing 10.9TB capacity. Looking at some older LTO-6 tapes which have 2.5TB raw, they come up as 2.3TB in Veeam. 2.3TB is 88.46% of the raw capacity. 10.9TB is 90.83% of the raw capacity.

I'd say that's pretty close, but unfortunately like the usable size of hard drives, the larger the tape capacity the more you lose. :x
You're not really losing anything, it's just the conversion from terabytes, which is used by storage vendors to advertise capacity, to tebibytes, which is used by the OS (and Veeam as far as I know) to display capacity. The confusion comes in that they both use the same abbreviation of TB to refer to these two different things. Technically, I'd say it's the OS that is "wrong" since the abbreviation for tebibyte is TiB, but would anyone know what that is? Even if they did, technically it's the JEDEC 100B.01 standard that defines the "common usage" of KB/MB/GB uses power of 2 values, so it's not really wrong per-se. Basically, in common computer usage people know that a KB=1024 bytes, but storage manufacturers use KB=1000 bytes.

2.5 Terabytes = 2.27375 Tebibytes which rounded is 2.3 and thus is displayed by the OS as 2.3TB. For LTO8, that 12 terabytes = 10.9139 tebibytes which, when rounded, is displayed as 10.9 TB.

For a little deeper dive into the math, the LTO8 capacity is 12,000,000,000,000 (12 trillion) bytes. If you divide by 1,000,000,000,000 (one terabyte) then that's 12 terabytes. However, the computer uses 2^40 bytes which is 1,099,511,627,776 bytes (1024*1024*1024*1024 instead of 1000*1000*1000*1000). 12,000,000,000,000/1,099,511,627,776 = 10.91393642127514 tebibytes. Note that you still have all 12 trillion bytes, it's just the OS is displaying tebibytes instead of terabytes.

It's probably easier to just use Google to convert between them, 12 terabytes is equal to 10.9 tebibytes.
jfnk1ng
Influencer
Posts: 18
Liked: never
Joined: Feb 07, 2018 3:26 pm
Full Name: Jeremy King
Contact:

Re: LTO8 Capacity

Post by jfnk1ng »

Thanks all for your replies in this. Quantum support didn't really add to the conversation - just sent links to the specs and user guide which reiterated 12TB as the capacity.

The terabyte v tebibyte thing is interesting. I know there is an increasing tendency to use trillions rather than 1024^4 when quoting TB so that definitely rings true.

Cheers
Jeremy
Post Reply

Who is online

Users browsing this forum: No registered users and 20 guests