The customer has changed the the second Tapedrive with a older one (LTO7) The HPE MSL3040 Tape Library has now 2 Tapedrives, one with LTO8 and one with LTO7. In the ABR11 Tape Infrastructure Library with 2 drives, the second drive (replaced from LTO8 to LTO7) still shows the LTO8. How can the red marked Drive2 be deleted and the LTO7 drive be recognized correctly?
Thanks!
-
Novell2
- Enthusiast
- Posts: 83
- Liked: 2 times
- Joined: Feb 05, 2010 4:12 pm
- Full Name: Zeller Werner
- Contact:
-
HannesK
- Product Manager
- Posts: 14322
- Liked: 2890 times
- Joined: Sep 01, 2014 11:46 am
- Full Name: Hannes Kasparick
- Location: Austria
- Contact:
Re: How to delete the second Tapedrive
Hello,
Are the drives all shown correctly in the Windows device management? Did you already do "rescan library"? What are the options when you right click on the drive?
Overall, there is a limitation that you are running into...
Hannes
Are the drives all shown correctly in the Windows device management? Did you already do "rescan library"? What are the options when you right click on the drive?
Overall, there is a limitation that you are running into...
Best regards,Within a library partition, only one generation of LTO drives are supported.
Hannes
-
Novell2
- Enthusiast
- Posts: 83
- Liked: 2 times
- Joined: Feb 05, 2010 4:12 pm
- Full Name: Zeller Werner
- Contact:
Re: How to delete the second Tapedrive
The Solution to this was:
Library:
1. Navigate to the Configuration > System > Save/Restore Configuration Screen
2. Expand the Reset the List of Known Drives and Modules area and then click Reset
Veeam:
rescan in Veeam.
Library:
1. Navigate to the Configuration > System > Save/Restore Configuration Screen
2. Expand the Reset the List of Known Drives and Modules area and then click Reset
Veeam:
rescan in Veeam.
Who is online
Users browsing this forum: No registered users and 10 guests