Monitoring and reporting for Veeam Backup & Replication, VMware vSphere and Microsoft Hyper-V in a single System Center Operations Manager Console
Post Reply
vBPav
Expert
Posts: 181
Liked: 13 times
Joined: Jan 13, 2010 6:08 pm
Full Name: Brian Pavnick
Contact:

We don't need no stink'n: Refresh Hardware Information

Post by vBPav » 2 people like this post

Are you still seeing the Refresh Hardware Information events in vCenter? If you are running Veeam MP v5.7, you shouldn’t!
Untitled picture.png
Untitled picture.png (49.25 KiB) Viewed 6156 times
Let’s first talk about hardware monitoring in general. The Veeam MP monitors both the health and performance of each ESX Host in your environment. It monitors for local fan, power supply, hard drive, and raid controller failures, for instance. It also collects and monitors metrics such as temperature, fan speed, watts, amps, and voltage. We can do this, agentlessly, by tapping into CIM/SMASH on each ESX Host.

With the Refresh Hardware Information events, you are seeing VMware API messaging each time we request the VMware API to refresh hardware information from CIM/SMASH. This is our older method (v5.6 and lower) for gathering hardware information, and is the fallback method for when our new method (available in v5.7 and higher) is not working.

Our new method for gathering hardware information taps directly into CIM/SMASH on each VMware ESX Host via the CIM-XML Service, completely by-passing the VMware APIs. This method requires a connection from each Veeam Collector to each ESX Host. Our Veeam MP Installation Guide defines the following prerequisites to make this happen:

1.) Open TCP port 5989 (two-way) between each Veeam Collector and each ESX Host
2.) Grant the Veeam MP vCenter Connection account CIM Interaction privileges on each vCenter
  • a.) Clone the “Read-Only” role and name, “Veeam MP Read-Only”
    b.) Edit the new “Veeam MP Read-Only” role and add privilege “HOST\CIM Interaction”
    c.) Assign the new “Veeam MP Read-Only” role to the Veeam MP Connection Account
Alternatively, if you would like to get by with the old method for gathering hardware information, you can increase the duration that we refresh the VMware APIs. This can be done from within the Veeam EMS Console.

1.) Log into the Veeam EMS Console
2.) Click on the “Enterprise Manager” tab
3.) Click on the “Collection Settings” button under Administration.
4.) Uncheck “Use defaults”
5.) Increase the Interval Multiplier for Hardware details from 5 (5 min x 5 multiplier = 25 min) to 10 (5 min x 10 multiplier = 50 min) or higher.

The hardware refresh task cycles through every ESX Host within the defined time period set above. So, if you had 10 hosts and had set the Hardware details to 6 (5 min x 6 multiplier = 30 mins) then you would typically see a hardware refresh event in vCenter once every 3 mins (30 min / 10 host = 3 min / 1 host).

In the past, some of our customers had set this multiplier to 96 (8hrs) and even 144 (12hrs) to reduce the number of events generated by the VMware APIs. Ultimately, this is why we replaced this old generation method with the new. Because we did not like the idea of our customers going 8hrs+ without knowing whether they have a faulty hardware condition on a ESX Host.
Brian Pavnick | Cireson| Solutions Architect

- Follow me on Twitter @ vbpav
- Reach me on e-mail @ brian.pavnick@cireson.com
albertwt
Veeam Legend
Posts: 879
Liked: 46 times
Joined: Nov 05, 2009 12:24 pm
Location: Sydney, NSW
Contact:

Re: We don't need no stink'n: Refresh Hardware Information

Post by albertwt »

Hi,

I'm using VeeamONE 9.0 Update 1 how can I change the service account for the below task:

Image

Thanks in advance.
--
/* Veeam software enthusiast user & supporter ! */
Vitaliy S.
VP, Product Management
Posts: 27055
Liked: 2710 times
Joined: Mar 30, 2009 9:13 am
Full Name: Vitaliy Safarov
Contact:

Re: We don't need no stink'n: Refresh Hardware Information

Post by Vitaliy S. » 1 person likes this post

This task is performed under account you have vCenter Server added in Veeam ONE. Why do you need to change it?
albertwt
Veeam Legend
Posts: 879
Liked: 46 times
Joined: Nov 05, 2009 12:24 pm
Location: Sydney, NSW
Contact:

Re: We don't need no stink'n: Refresh Hardware Information

Post by albertwt »

Yes, I need it to change the service account instead of using the Domain\dmin account.
--
/* Veeam software enthusiast user & supporter ! */
Vitaliy S.
VP, Product Management
Posts: 27055
Liked: 2710 times
Joined: Mar 30, 2009 9:13 am
Full Name: Vitaliy Safarov
Contact:

Re: We don't need no stink'n: Refresh Hardware Information

Post by Vitaliy S. » 1 person likes this post

You need to right-click on the vCenter Server object in Veeam ONE Monitor Client and then you can change the connection account.
albertwt
Veeam Legend
Posts: 879
Liked: 46 times
Joined: Nov 05, 2009 12:24 pm
Location: Sydney, NSW
Contact:

Re: We don't need no stink'n: Refresh Hardware Information

Post by albertwt »

Yes, spot on !
you are right Vitaliy.

Thanks for thw quick fix :D b
--
/* Veeam software enthusiast user & supporter ! */
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests