Standalone backup agent for Microsoft Windows servers and workstations (formerly Veeam Endpoint Backup FREE)
Post Reply
johannesk
Expert
Posts: 176
Liked: 38 times
Joined: Jan 19, 2016 1:28 pm
Full Name: Jóhannes Karl Karlsson
Contact:

Backup VM's in Windows Failover Cluster

Post by johannesk »

Hi,
Anyone here using Veeam agent to backup windows VM's setup as Windows Failover cluster?
We are trying this out. We configure a protection group with the cluster node name and a backup that then detects the vm's for it.
Then run the backup to backup entire computer and it's successful. If we then restore the entire passive node the vm does not get the correct scsi configuration. The vm has got vmware paravirtual SCSI adapter with scsi bus sharing as virtual. But when restored it comes with the LSI Logic SAS scsi controller.
How do you go about doing a DR restore of the vm's? Will it be possible to use the backup to rebuild the cluster? or can the backup only be used to restore files?

Regards,
Jóhannes
Dima P.
Product Manager
Posts: 14899
Liked: 1811 times
Joined: Feb 04, 2013 2:07 pm
Full Name: Dmitry Popov
Location: Prague
Contact:

Re: Backup VM's in Windows Failover Cluster

Post by Dima P. »

Hello Jóhannes,
If we then restore the entire passive node the vm does not get the correct scsi configuration.
Can you clarify how the restore is performed?
Will it be possible to use the backup to rebuild the cluster? or can the backup only be used to restore files?
The Veeam Agent for Windows recovery option supports Bare Metal Recovery for a node; however, cluster configuration is not preserved and must be rebuilt manually.
johannesk
Expert
Posts: 176
Liked: 38 times
Joined: Jan 19, 2016 1:28 pm
Full Name: Jóhannes Karl Karlsson
Contact:

Re: Backup VM's in Windows Failover Cluster

Post by johannesk »

I have created support case #07844406 for this.

The restore performed is straight forward. I start instant recovery of the passive node (the vm with only drive C:) from the source backup job to Mware vSphere. Configure the destination to the same host,path and datastore as the VM was running with when backed up. I configure the network to be connected (also tried not connected). Restore with same BIOS UUID. Then the instant restore is started. On that VM that gets created in vmware it gets LSI Logic SAS SCSI adapter instead of VMware paravirtual SCSI adapter. Then I make it migrate to the datastore. The end result is a restored VM without VMware Paravirtual SCSI adapter.

So I guess this has nothing to do with the fact that the VM is part of a cluster. But it does have the vmware paravirtual SCSI adapter because it's a part of a cluster.
johannesk
Expert
Posts: 176
Liked: 38 times
Joined: Jan 19, 2016 1:28 pm
Full Name: Jóhannes Karl Karlsson
Contact:

Re: Backup VM's in Windows Failover Cluster

Post by johannesk »

I received information from Veeam support on my case on this topic #07844406.

The logic is that the agent is running on the OS itself, not interfering with the VM manager. Therefore Instant Recovery requires further manual adjustments as the agent backup main goal is to backup the OS.

So according to that we will need to manually reconfigure the SCSI adapters on restored cluster node.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest