Host-based backup of VMware vSphere VMs.
Post Reply
pinkerton
Enthusiast
Posts: 82
Liked: 4 times
Joined: Sep 29, 2011 9:57 am
Contact:

Direct SAN access and vRDMs

Post by pinkerton »

Hi,

since replication with VBR6 and vSphere 5 is working so great we are considering to replicate some servers that are currently using pRDMs as well. I know we need to change the type of the RDMs from physical to virtual before this is going to work, but that is not going to be a problem.

My question is whether vRDMs can be read with Direct SAN access as well and if is suitable enough to just present the RDM-LUN to the VBR server. Since the partition on the RDM LUN is formatted directly with NTFS I know that I need to take special care with presenting the LUN to the VBR server. Am I correct in assuming that the LUN needs to be ONLINE in Windows disk manager but a drive leter must not be assigned?

Thanks
Michael
Patje
Novice
Posts: 7
Liked: never
Joined: Jul 08, 2011 11:20 am
Full Name: Patrick van Beek
Contact:

Re: Direct SAN access and vRDMs

Post by Patje »

Hi Michael,

As far as I know, this not possible.
you cannot present a NTFS volume to 2 windows hosts at the same time
Even if you don't present a drive letter, windows will try to put a signature on the disk and you do NOT want that.
VBR will only backup native VMDK files.
You should be able to backup the virtual machine, but the not the vRDM.

If there is a workaround, I'd like to know as well.

grts,
Patrick
pinkerton
Enthusiast
Posts: 82
Liked: 4 times
Joined: Sep 29, 2011 9:57 am
Contact:

Re: Direct SAN access and vRDMs

Post by pinkerton »

Hi Patrick,

I've just tested this. The VBR server is 2008 R2 and I can present the vRDM to Windows without any problems, making it online in disk manager however does not make it available for Direct SAN Access in Veeam. When performing a backup of a VM with a vRDM configured and failover to NBD is NOT enabled, I get the following result:

Image

The backup fails right away. And strangely the vRDM disk is the first disk being backed up, not the system disk (VMDK).

When enabling failover to NBD on the backup proxy, I can successfully backup the vRDM and once finished it automatically switches back to Direct SAN access for the system disk (VMDK):

Image

So, anyone know whether it is possible to backup a vRDM disk using Direct SAN access? This would be very useful, since we use RDMs only for large disks where Direct SAN access would make much sense.


Thanks,
Michael

btw: NTFS disks can be presented among Windows systems without any problems. You just need to be careful when presenting disks that have different file systems on it. But even with immense testing I was not able to have Windows (2008R2) write a new signature on a VMFS volume.
Patje
Novice
Posts: 7
Liked: never
Joined: Jul 08, 2011 11:20 am
Full Name: Patrick van Beek
Contact:

Re: Direct SAN access and vRDMs

Post by Patje »

Michael,

Thanks for the info, I was not aware NBD would backup the vRDM, good to know.
I do agree, it would be nice to use Direct San for vDRM's
I'm curious as to why this is not possible since the backup server is able to see the volume, hoping someone from Veeam can shed some light into this.

regards,
Patrick
pinkerton
Enthusiast
Posts: 82
Liked: 4 times
Joined: Sep 29, 2011 9:57 am
Contact:

Re: Direct SAN access and vRDMs

Post by pinkerton »

I'm opening a case with support and ask them whether this is possible or not. Would indeed be good if this was possible.
Gostev
Chief Product Officer
Posts: 31804
Liked: 7298 times
Joined: Jan 01, 2006 1:01 am
Location: Baar, Switzerland
Contact:

Re: Direct SAN access and vRDMs

Post by Gostev »

This should definitely work in both hotadd and network mode. As for direct SAN access, I am not sure (frankly, until your post I thought that this works fine). I will need to wait for devs to come back from New Year holidays, and will check with them on that. Please do open a support case (and post the support case ID), as having the logs handy will certainly help me get the answer faster. Thanks!

P.S. I still think everyone should get rid of vRDMs and go with VMDKs ;) you are not fully virtualized until your storage is virtualized as well.
pinkerton
Enthusiast
Posts: 82
Liked: 4 times
Joined: Sep 29, 2011 9:57 am
Contact:

Re: Direct SAN access and vRDMs

Post by pinkerton »

Thanks Anton, Case ID is 5164362. If the devs say it should generally work I'll do another test and send logfiles!
pinkerton
Enthusiast
Posts: 82
Liked: 4 times
Joined: Sep 29, 2011 9:57 am
Contact:

Re: Direct SAN access and vRDMs

Post by pinkerton »

In order to send clean log files to support I repeated all steps today:

- Added the vRDM to the VM
- Presented the corresponding LUN to the VBR server
- Created a new backup job with the VM

And now everything worked fine. Yesterday I only used "Manual Selection" in the Backup Proxy Settings and presented the LUN with only one path, today I tried "Automatic Detection" and used four paths. However, even repeating the steps form yesterday wíth Manual Selection and one path Presentation worked fine today. It even worked if the vRDM LUN is available in Windows Disk Management but set to Offline.

Actually everything worked today as long as the vRDM LUN is presented to the VBR server.

Will change a production pRDM to vRDM on the weekend and then run the initial replication during the weekend (1TB). Then we can use CBT incremental replication for our file server as well :-)

Thanks all for your help!
ivglukh
Enthusiast
Posts: 67
Liked: 1 time
Joined: Jan 12, 2012 8:20 am
Full Name: Ivan Glukhov
Contact:

Re: Direct SAN access and vRDMs

Post by ivglukh »

Anton, what is the latest on this topic? Will SAN Direct Access work with Virtual RDM?

Thank you!
Vitaliy S.
VP, Product Management
Posts: 27371
Liked: 2799 times
Joined: Mar 30, 2009 9:13 am
Full Name: Vitaliy Safarov
Contact:

Re: Direct SAN access and vRDMs

Post by Vitaliy S. »

Based on the OP support case notes it does seem to work.
spgsit5upport
Expert
Posts: 221
Liked: 16 times
Joined: May 28, 2010 10:25 am
Full Name: Seb
Contact:

Re: Direct SAN access and vRDMs

Post by spgsit5upport »

In my environment I can not get vRDM disks being backed up by Direct SAN access, it does give me the same warning as in original pinkerton's message: "Unable to establish direct connection to the shared storage (SAN)."

vmdks being backed up by [san], but vRDM are NOT
Gostev
Chief Product Officer
Posts: 31804
Liked: 7298 times
Joined: Jan 01, 2006 1:01 am
Location: Baar, Switzerland
Contact:

Re: Direct SAN access and vRDMs

Post by Gostev »

Remember to include support case ID whenever posting about any technical issue, otherwise we will not be able to take any action on your issue. Thanks.
spgsit5upport
Expert
Posts: 221
Liked: 16 times
Joined: May 28, 2010 10:25 am
Full Name: Seb
Contact:

Re: Direct SAN access and vRDMs

Post by spgsit5upport »

But I do not have any case ID. I might open case, but it often more hustle then find a solution in a different way (talking from experience so far in the last x years using Veeam)
Gostev
Chief Product Officer
Posts: 31804
Liked: 7298 times
Joined: Jan 01, 2006 1:01 am
Location: Baar, Switzerland
Contact:

Re: Direct SAN access and vRDMs

Post by Gostev »

You are more than welcome to try and find the solution by searching the existing topics. For example, as you can see from this topic, there are no known issues with Direct SAN access and vRDMs. However, if you chose to post about an issue, we require that support case ID is included. We have introduced this a requirement for a number of reasons. Please review the corresponding forum rules for more information. These are provided when you click New Topic.

There is absolutely no hustle in opening a support case, it takes less than a minute at our Customer Support Portal, and you will immediately get a support case ID to include with your forum posting.

Here is another helpful thread you may want to take a look at > Direct SAN access failure troubleshooting

Thanks!
spgsit5upport
Expert
Posts: 221
Liked: 16 times
Joined: May 28, 2010 10:25 am
Full Name: Seb
Contact:

Re: Direct SAN access and vRDMs

Post by spgsit5upport »

The hustle is to deal with the issue later. I am yet to get good support guys to actually do something good , so far that was never a case, and it involves a ping pong of e-mails (mostly waste of time)
foggy
Veeam Software
Posts: 21138
Liked: 2141 times
Joined: Jul 11, 2011 10:22 am
Full Name: Alexander Fogelson
Contact:

Re: Direct SAN access and vRDMs

Post by foggy »

Seb, you can always ask to escalate the case to a manager, if you feel you are wasting time in e-mail conversation. Also, our support is always ready to set up a webex session with you to troubleshoot the issue more efficiently.
spgsit5upport
Expert
Posts: 221
Liked: 16 times
Joined: May 28, 2010 10:25 am
Full Name: Seb
Contact:

Re: Direct SAN access and vRDMs

Post by spgsit5upport »

Last time I had webex session it was just a waste of time (honestly). The time that I do not have...
danswartz
Veteran
Posts: 266
Liked: 30 times
Joined: Apr 26, 2013 4:53 pm
Full Name: Dan Swartzendruber
Contact:

Re: Direct SAN access and vRDMs

Post by danswartz »

Hustle? Do you mean hassle?
spgsit5upport
Expert
Posts: 221
Liked: 16 times
Joined: May 28, 2010 10:25 am
Full Name: Seb
Contact:

Re: Direct SAN access and vRDMs

Post by spgsit5upport » 1 person likes this post

Yes I do.

In fact I went through the logs & it turned out that it was a SINGLE vRDM that was being backed up network.
And this was correct, as that very LUN was on an array that was NOT accessible to the Veeam server.

As it was the first (in order) vRDM attached to this server, I simply assumed (wrongly) that it applied to all of the vRDMs

The Job Statistics summary screen does not make it obvious (in that case) that the message applied to ONLY one LUN

But all is well

Seb
foggy
Veeam Software
Posts: 21138
Liked: 2141 times
Joined: Jul 11, 2011 10:22 am
Full Name: Alexander Fogelson
Contact:

Re: Direct SAN access and vRDMs

Post by foggy »

Seb, glad you've nailed it. Thanks for the update.
luckyinfil
Enthusiast
Posts: 91
Liked: 10 times
Joined: Aug 30, 2013 8:25 pm
Contact:

[MERGED] How to backup vRDM over SAN mode?

Post by luckyinfil »

I have a requirement to backup a VM with a vRDM. With regular vmdks, the zoning is straight forward - just zone the LUN to both the ESXi hosts and the physical veeam server in order to backup over the FC.

In order to backup vRDMs over SAN mode, how do you zone the LUNs? There's the vRDM LUN as well as the LUN where the VMDK and the vRDM pointer files are stored.
Vitaliy S.
VP, Product Management
Posts: 27371
Liked: 2799 times
Joined: Mar 30, 2009 9:13 am
Full Name: Vitaliy Safarov
Contact:

Re: Direct SAN access and vRDMs

Post by Vitaliy S. »

Hi John,

I believe you should give access Veeam backup server to both LUNs, with the pointer and with actual data. Please see this topic for more details.

Thanks!
luckyinfil
Enthusiast
Posts: 91
Liked: 10 times
Joined: Aug 30, 2013 8:25 pm
Contact:

Re: Direct SAN access and vRDMs

Post by luckyinfil » 2 people like this post

Thanks. Just wanted to confirm that both the vRDM LUN and the LUN where the vmdks and vRDM pointer files are located must be visible to the Veeam Backup Proxy.
veremin
Product Manager
Posts: 20400
Liked: 2298 times
Joined: Oct 26, 2012 3:28 pm
Full Name: Vladimir Eremin
Contact:

Re: Direct SAN access and vRDMs

Post by veremin »

Hi, John, thank you for taking time and updating the topic with your findings; much appreciated.
BriFar
Veeam ProPartner
Posts: 23
Liked: 11 times
Joined: Oct 24, 2011 12:55 pm
Full Name: Brian Farrugia
Location: Malta, Europe
Contact:

Re: Direct SAN access and vRDMs

Post by BriFar »

luckyinfil wrote:Thanks. Just wanted to confirm that both the vRDM LUN and the LUN where the vmdks and vRDM pointer files are located must be visible to the Veeam Backup Proxy.
Doing this does not allow you to backup the vRDM in SAN mode right? I am asking because in your previous post you mentioned you wanted to use SAN Backup. It is also stated in the helpcenter that "Also, consider that backup for vRDM disks in the in Direct SAN Access mode is not supported."

see
http://helpcenter.veeam.com/backup/70/v ... ccess.html

In all my testing, for a customer with 30+ VMs all with pRDMs, it always failed over to NBD. I tested with one VM converting to vRDM. It would be really good if SAN mode was supported as it would spare me from doing storage vmotion on all the LUNS to VMDKs.

Since SAN mode backup is not supported on vRDMS I would not present these LUNs to the Backup Proxy. Mainly to keep it clean and to avoid issues i.e make the drive online by mistake.
foggy
Veeam Software
Posts: 21138
Liked: 2141 times
Joined: Jul 11, 2011 10:22 am
Full Name: Alexander Fogelson
Contact:

Re: Direct SAN access and vRDMs

Post by foggy »

BriFar wrote:Doing this does not allow you to backup the vRDM in SAN mode right? I am asking because in your previous post you mentioned you wanted to use SAN Backup. It is also stated in the helpcenter that "Also, consider that backup for vRDM disks in the in Direct SAN Access mode is not supported."

see
http://helpcenter.veeam.com/backup/70/v ... ccess.html
After short investigation it turned out that this note was put in help by mistake. Thanks for pointing that out!
BriFar wrote:In all my testing, for a customer with 30+ VMs all with pRDMs, it always failed over to NBD. I tested with one VM converting to vRDM. It would be really good if SAN mode was supported as it would spare me from doing storage vmotion on all the LUNS to VMDKs.
Generally, backup SAN mode should work for vRDM (not pRDM, which are automatically skipped during processing), so probably some configuration issue. Support could help in verifying the environment.
BriFar
Veeam ProPartner
Posts: 23
Liked: 11 times
Joined: Oct 24, 2011 12:55 pm
Full Name: Brian Farrugia
Location: Malta, Europe
Contact:

Re: Direct SAN access and vRDMs

Post by BriFar »

Hi foggy,
support told me that vRDM do not support direct SAN backup and pointed me to the note I linked before.
Case No. 00544200.
In that case I had an issue with the particular VM but the final note was still that SAN mode Backup was not supported for vRDMs. For the sake of this thread I quickly installed a 2008 SP2 on a vRDM disk. The vRDM LUN and the LUN where the vm resides were presented to the backup server. To my surprise it backed up in SAN mode.
I am sure I did the same test after the case was closed and it failed over to the network mode.

Sorry all if I confused anyone with the previous reply and thanks foggy for persisting that SAN mode for vRDM is supported.
foggy
Veeam Software
Posts: 21138
Liked: 2141 times
Joined: Jul 11, 2011 10:22 am
Full Name: Alexander Fogelson
Contact:

Re: Direct SAN access and vRDMs

Post by foggy »

Brian, thanks for sorting this finally out. I will approach support guys involved in your case with this to avoid confusion in future.
sani
Novice
Posts: 7
Liked: never
Joined: Jul 17, 2018 5:34 am
Full Name: sani
Contact:

[MERGED] vRDM LanFree Backup

Post by sani »

Hi

i have a vm with virtual RDM disk and backup job works fine with network.can i backup from this vm with Direct SAN(Lan free)?

thanks
MichaelCade
Veeam Software
Posts: 315
Liked: 74 times
Joined: Mar 23, 2015 11:55 am
Full Name: Michael Cade
Location: Cambridge, United Kingdom
Contact:

[MERGED] Re: vRDM LanFree Backup

Post by MichaelCade »

I have not tested this recently but I am confident providing the LUN is masked also to the Veeam proxy that DirectSAN can be achieved.

Access should be read-only for all LUNs (VMFS and/or RDM) from the storage array configuration.
Regards,

Michael Cade
Global Technologist
Veeam Software
Email: Michael.Cade@Veeam.com
Twitter: @MichaelCade1
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 57 guests