Discussions related to exporting backups to tape and backing up directly to tape.
Post Reply
tfloor
Veteran
Posts: 270
Liked: 15 times
Joined: Jan 03, 2012 2:02 pm
Full Name: Tristan Floor
Contact:

Where are my incrementals?

Post by tfloor »

Hi,

I need some explanation about how the backup full / incrementals to tape are working.
I've read the user guide, but i still don't understand exactly how it works.

I've a backup to disk job with 1 test vm. 1x Full and 3 incrementals.
Then i created a Backup to Tape Job, and select the previous test-vm-job to backup.

Then i assign a full backup pool "Media pool full backups"
And i also select "Process incremental backup files" and assign "Media pool Incremental Backups"

Started the job, and ended with only a new media set created under the "media pool Full Backups".
Don't see the incrementals on tape.

So the question is. Where are the incrementals?


The goal of my situation is to backup incrementals of 4 backups jobs on Monday till thursday, and on friday the synthetic full. All of them to tape.
If that is working i can move backup exec to the trash.

I appreciate any advice. :idea:

Tristan.
Dima P.
Product Manager
Posts: 14396
Liked: 1568 times
Joined: Feb 04, 2013 2:07 pm
Full Name: Dmitry Popov
Location: Prague
Contact:

Re: Where are my incrementals?

Post by Dima P. »

Hello Tristan,

Incremental backups should be stored on the media, assigned to the Incremental media pool. Could you please confirm it, running Restore wizard: Restore wizard > Source and press "Point" button on the right side of the wizard: it should display all the available restore points for the VM, as well as provide you with the detailed information.

Please note: If you choose a full backup point in the list, Veeam Backup & Replication will restore only this full backup. If you choose an increment, Veeam Backup & Replication will restore a chain consisting of a full backup and forward increments, necessary to restore selected VM to the required point-in-time.

Thank you.
tfloor
Veteran
Posts: 270
Liked: 15 times
Joined: Jan 03, 2012 2:02 pm
Full Name: Tristan Floor
Contact:

Re: Where are my incrementals?

Post by tfloor »

That's exactly what i did.

Made 2 pools.
1x full backup media pool
1x incremental backup media pool

assigned 2 test tapes to each media pool.

And i also have checked the restore wizard > Point, i only see 1 restore point. It's the media set Full backup %date%
Another interesting thing is that i don't see a media set created on tapes within the incremental pool.
So all tapes in the incremental pool are empty (no files)

So i don't know if i do something wrong.
Dima P.
Product Manager
Posts: 14396
Liked: 1568 times
Joined: Feb 04, 2013 2:07 pm
Full Name: Dmitry Popov
Location: Prague
Contact:

Re: Where are my incrementals?

Post by Dima P. »

Tristan,

Unfortunately, I need to ask you to contact the support team and provide them with logs for deep investigation, as right now it does not work as expected. Thank you.
tfloor
Veteran
Posts: 270
Liked: 15 times
Joined: Jan 03, 2012 2:02 pm
Full Name: Tristan Floor
Contact:

Re: Where are my incrementals?

Post by tfloor »

Oke, thanks. I will create a support ticket.
I will post the results here.
Dima V.
Veeam Software
Posts: 50
Liked: 12 times
Joined: Oct 21, 2010 8:54 am
Full Name: Dmitry Vedyakov
Contact:

Re: Where are my incrementals?

Post by Dima V. »

Tristan,

Just to be sure.
Do you use Reversed Incremental or Forward Incremental backup mode for your backup job?

Backup to tape job processes only VBK (full backups) and VIB files (forward increments). Reversed increments (VRB) are skipped form processing.
tfloor
Veteran
Posts: 270
Liked: 15 times
Joined: Jan 03, 2012 2:02 pm
Full Name: Tristan Floor
Contact:

Re: Where are my incrementals?

Post by tfloor »

I use Forward incremental backups. (i've read that already in the user guide).
And because of the need for tape backups i use forwards.
Dima P.
Product Manager
Posts: 14396
Liked: 1568 times
Joined: Feb 04, 2013 2:07 pm
Full Name: Dmitry Popov
Location: Prague
Contact:

Re: Where are my incrementals?

Post by Dima P. »

Tristan,
Thank you for the heads up!

Please let us know the case number, after you would contact support team so we could track the investigation!
tfloor
Veteran
Posts: 270
Liked: 15 times
Joined: Jan 03, 2012 2:02 pm
Full Name: Tristan Floor
Contact:

Re: Where are my incrementals?

Post by tfloor »

I'm at the moment busy with the case.
It looks like that Veeam has still problems opening the tape drive.
Probably because of another process is still blocking access.

While i already has stopped all the backup exec processes, i now have disabled them and will try again.
It's not possible to uninstall the backup exec, because he has to backup to tape each night, while i'm further test with the veeam tape features.
tfloor
Veteran
Posts: 270
Liked: 15 times
Joined: Jan 03, 2012 2:02 pm
Full Name: Tristan Floor
Contact:

Re: Where are my incrementals?

Post by tfloor »

Disabling the services is not the solution:

Still see this in the logs:

[20.08.2013 12:15:47] <08> Info [AP] (c24a) error: Cannot get tape media parameters: Tape error: '21' (The device is not ready.\n) \n--tr:Cannot start new tape backup session 'Backup set 20-8-2013 12:15:37 created' for tape 'Tape0'.\n--tr:Client failed to process the command. Command: [startSessionTape].\n

So there must be something else :S
tfloor
Veteran
Posts: 270
Liked: 15 times
Joined: Jan 03, 2012 2:02 pm
Full Name: Tristan Floor
Contact:

Re: Where are my incrementals?

Post by tfloor » 2 people like this post

I think i have found the solution.

In my device manager the driver of the tape drive is from symantec corporation.
I've said "update driver" and let windows search for something else, and came back with a driver from HP.
After that is was possible to do the backups to tape again.


So i think it's better to use windows or manufactered drivers and not from a backup solution like symantec .....
and then it's still needed to stop the backup exec services, because BU wants exclusive access to the tape device .(grrr)

I can now fully test the tape feature.
Gostev
Chief Product Officer
Posts: 31459
Liked: 6648 times
Joined: Jan 01, 2006 1:01 am
Location: Baar, Switzerland
Contact:

Re: Where are my incrementals?

Post by Gostev »

Thanks for the update, Tristan!
nunciate
Expert
Posts: 247
Liked: 39 times
Joined: May 21, 2013 9:08 pm
Full Name: Alan Wells
Contact:

Re: Where are my incrementals?

Post by nunciate »

I have a Quantum i80 with 4 LTO6 FC drives. I have "Weekly Full" and "Daily Incremental" media pools setup. I have all jobs setup to do the full and incremental to each of those pools. Every backup I run is placed into the Weekly Full pool even incremental jobs. I do have the tape library driver installed from the Quantum site. I also can't believe that a single pool can only access 1 drive at a time as the job locks the pool. Meaning I have to run every job to a different pool so that each job can take the next available drive. Which means every job will get a new tape if I understand how this works. Unacceptable! I will run out of tapes in the library just doing incremental backups if I don't fill it all the way.
foggy
Veeam Software
Posts: 21069
Liked: 2115 times
Joined: Jul 11, 2011 10:22 am
Full Name: Alexander Fogelson
Contact:

Re: Where are my incrementals?

Post by foggy »

nunciate wrote:Every backup I run is placed into the Weekly Full pool even incremental jobs.
Alan, this should not be the case and, as you've already been advised in the adjacent thread, please open the case for this problem to be investigated. Thanks.
Post Reply

Who is online

Users browsing this forum: Bing [Bot], DataDefender and 16 guests