Comprehensive data protection for all workloads
Post Reply
Ratti3
Novice
Posts: 8
Liked: 3 times
Joined: Oct 03, 2012 8:46 am
Contact:

Veeam and HP 3PAR StorServ 7400, direct san access

Post by Ratti3 »

Hi,

We have just purchased a HP 3PAR StorServ 7400 SAN to replace an EVA 4100.
I'd like to know if Veeam supports this SAN for direct san access for backups?

Thanks
foggy
Veeam Software
Posts: 21069
Liked: 2115 times
Joined: Jul 11, 2011 10:22 am
Full Name: Alexander Fogelson
Contact:

Veeam and HP 3PAR StorServ 7400, direct san access

Post by foggy »

Hello!

If you are talking about direct SAN access transport mode that is used during backup and replication jobs to retrieve data from the source storage, than Veeam B&R is storage agnostic in this sense and you can configure direct access to any storage that allows it.

Veeam B&R also provides Veeam Explorer for SAN Snapshots functionality, which currently allows for granular VMware recovery from HP StoreVirtual VSA and LeftHand snapshots. HP 3PAR support is coming in Veeam B&R v7.

Thanks!
Ratti3
Novice
Posts: 8
Liked: 3 times
Joined: Oct 03, 2012 8:46 am
Contact:

Re: Veeam and HP 3PAR StorServ 7400, direct san access

Post by Ratti3 »

thanks that makes sense, good to know, looking forward to some blistering speeds during backup.
veremin
Product Manager
Posts: 20270
Liked: 2252 times
Joined: Oct 26, 2012 3:28 pm
Full Name: Vladimir Eremin
Contact:

Re: Veeam and HP 3PAR StorServ 7400, direct san access

Post by veremin »

looking forward to some blistering speeds during backup.
Kindly keep us updated about the results you'll get. Thanks.
foggy
Veeam Software
Posts: 21069
Liked: 2115 times
Joined: Jul 11, 2011 10:22 am
Full Name: Alexander Fogelson
Contact:

Re: Veeam and HP 3PAR StorServ 7400, direct san access

Post by foggy »

Btw, today we announced another disruptive innovation that will be available in Veeam B&R v7 - Backup from Storage Snapshots. Stay tuned for further info about this feature.
Ratti3
Novice
Posts: 8
Liked: 3 times
Joined: Oct 03, 2012 8:46 am
Contact:

Re: Veeam and HP 3PAR StorServ 7400, direct san access

Post by Ratti3 » 3 people like this post

Got the results. System is the following:

Old System:
EVA 4100
15 NL Disks (500GB - 1TB) RAID5
27 FC Disks (146GB - 300GB) RAID5

Speeds were about 50 - 70 MB/s

New System:
3PAR 7400 (2 Configured Nodes)
48 FC 900GB 10K Disks RAID5 in 4 Cages

Speeds are now 200 -250 MB/s, this is showing as about 150-170 IOPS per disk, so near the max of 200 IOPS per disk.

Note the old EVA was allocated to the max, not all the data has been transferred to the 3PAR.
Did some IOMeter tests:

4K 80% Random reads

EVA - 170-400 IOPS 0.5-1MB/s <-- LOL
3PAR - 5000 IOPS 21MB/s (consistent at the moment)

Any questions about the 3PAR ask away
yizhar
Service Provider
Posts: 181
Liked: 48 times
Joined: Sep 03, 2012 5:28 am
Full Name: Yizhar Hurwitz
Contact:

Re: Veeam and HP 3PAR StorServ 7400, direct san access

Post by yizhar »

Hi.

Check these out in regard to SAN mode with 3PAR (I understand that you are already using it, but anyway FYI) :
http://forums.veeam.com/viewtopic.php?f ... 887#p80548
http://3parug.com/viewtopic.php?f=18&t=318

Yizhar
foggy
Veeam Software
Posts: 21069
Liked: 2115 times
Joined: Jul 11, 2011 10:22 am
Full Name: Alexander Fogelson
Contact:

Re: Veeam and HP 3PAR StorServ 7400, direct san access

Post by foggy »

Ratti3 wrote:Speeds are now 200 -250 MB/s, this is showing as about 150-170 IOPS per disk, so near the max of 200 IOPS per disk.
Impressive numbers. Thanks for sharing!
Ratti3
Novice
Posts: 8
Liked: 3 times
Joined: Oct 03, 2012 8:46 am
Contact:

Re: Veeam and HP 3PAR StorServ 7400, direct san access

Post by Ratti3 »

I have now transferred 70% of the VMs accross.

I'm now getting about 600MB/s, this is 2 jobs running at the same time.

Note Veeam is using CBT for these backups, on Friday an Active Full will run, I will post the results for that.
The backup repository is a HP DL380e Gen 8, with 18 1TB 7.2K SFF, I get 50,000 IOPS on a 32K Seq IOMETER test, so Veeam still reports the 3PAR SAN as the bottleneck.

Image
Image
veremin
Product Manager
Posts: 20270
Liked: 2252 times
Joined: Oct 26, 2012 3:28 pm
Full Name: Vladimir Eremin
Contact:

Re: Veeam and HP 3PAR StorServ 7400, direct san access

Post by veremin »

Thanks for sharing value information; highly-appreciated.

In addition, please, don't bother about the bottlenecks statistics, especially, when you get such a remarkable performance speed. The bottleneck stats just provide you with the information regarding amount of time that every backup component is busy, so the bottleneck will be always present (in every setup).

Thanks.
kte
Expert
Posts: 179
Liked: 8 times
Joined: Jul 02, 2013 7:48 pm
Full Name: Koen Teugels
Contact:

Re: Veeam and HP 3PAR StorServ 7400, direct san access

Post by kte »

Do you have any performance stags on you're full active backup because we are migrating from netapp to a p7400 (2N) with 80 900 10 SAS disks and 20 3TB MDL SAS disks to a DL380p with 10+12 4TB disks

Tanks
adgill
Lurker
Posts: 1
Liked: never
Joined: Oct 02, 2013 8:00 pm
Full Name: Aman Gill
Contact:

Re: Veeam and HP 3PAR StorServ 7400, direct san access

Post by adgill »

Hi, could you share how your job in Veeam is setup? How large is the datastore/volume that you are trying to backup? Are you backing up the data to a volume on 3APR or another EVA as a targer?

I am seing impressive speeds during full backups but incremental backups from 3PAR volumes are 1/4 of the speed.
Ratti3 wrote:Got the results. System is the following:

Old System:
EVA 4100
15 NL Disks (500GB - 1TB) RAID5
27 FC Disks (146GB - 300GB) RAID5

Speeds were about 50 - 70 MB/s

New System:
3PAR 7400 (2 Configured Nodes)
48 FC 900GB 10K Disks RAID5 in 4 Cages

Speeds are now 200 -250 MB/s, this is showing as about 150-170 IOPS per disk, so near the max of 200 IOPS per disk.

Note the old EVA was allocated to the max, not all the data has been transferred to the 3PAR.
Did some IOMeter tests:

4K 80% Random reads

EVA - 170-400 IOPS 0.5-1MB/s <-- LOL
3PAR - 5000 IOPS 21MB/s (consistent at the moment)

Any questions about the 3PAR ask away
kte
Expert
Posts: 179
Liked: 8 times
Joined: Jul 02, 2013 7:48 pm
Full Name: Koen Teugels
Contact:

Re: Veeam and HP 3PAR StorServ 7400, direct san access

Post by kte »

i get with veeam 7 in full backup 500MB/s , reverse incremental only between 25 and 80 MB/s but veea says it is the target

k
Gostev
Chief Product Officer
Posts: 31460
Liked: 6648 times
Joined: Jan 01, 2006 1:01 am
Location: Baar, Switzerland
Contact:

Re: Veeam and HP 3PAR StorServ 7400, direct san access

Post by Gostev »

Reversed incremental is 3x I/O on target comparing to full, so target is almost always a bottleneck for this backup mode.
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 176 guests