-
- Service Provider
- Posts: 8
- Liked: 1 time
- Joined: Mar 14, 2017 3:13 pm
- Full Name: Scott Hayden
- Contact:
Adding HPE StoreOnce to Backup Infrastructure - Question
Hello!
We have an HPE StoreOnce with interfaces connected to a management network and two interfaces connected to a data network. When adding it to backup infrastructure as a repository do we add the DNS name of the management interfaces or doing we add the data path IP / DNS name? If adding the management interface, does the catalyst protocol know to select the appropriate data network interfaces for data transfer?
We have an HPE StoreOnce with interfaces connected to a management network and two interfaces connected to a data network. When adding it to backup infrastructure as a repository do we add the DNS name of the management interfaces or doing we add the data path IP / DNS name? If adding the management interface, does the catalyst protocol know to select the appropriate data network interfaces for data transfer?
-
- Veeam Software
- Posts: 21085
- Liked: 2117 times
- Joined: Jul 11, 2011 10:22 am
- Full Name: Alexander Fogelson
- Contact:
Re: Adding HPE StoreOnce to Backup Infrastructure - Question
Hi Scot, you need to use the data interface name/address to add the array into Veeam B&R. Thanks!
-
- Service Provider
- Posts: 8
- Liked: 1 time
- Joined: Mar 14, 2017 3:13 pm
- Full Name: Scott Hayden
- Contact:
Re: Adding HPE StoreOnce to Backup Infrastructure - Question
Thanks for the quick reply Alex!
-
- Lurker
- Posts: 1
- Liked: 1 time
- Joined: Oct 03, 2023 5:31 pm
- Contact:
Re: Adding HPE StoreOnce to Backup Infrastructure - Question
Does the VBR server need to have access to the interfaces or do only the proxies need access?
If I wanted to have the data network be isolated (not routed) in *both* the Production or DR data centres, will Veeam interact with the DR StoreOnce via the proxy / gateway server? Or does the VBR server need to be able to reach the DR StoreOnce over the data network?
If I wanted to have the data network be isolated (not routed) in *both* the Production or DR data centres, will Veeam interact with the DR StoreOnce via the proxy / gateway server? Or does the VBR server need to be able to reach the DR StoreOnce over the data network?
-
- Veeam Software
- Posts: 21085
- Liked: 2117 times
- Joined: Jul 11, 2011 10:22 am
- Full Name: Alexander Fogelson
- Contact:
Re: Adding HPE StoreOnce to Backup Infrastructure - Question
In general, only the gateway server needs access to the array. But given (depending on setup) backup server can serve as a gateway, it is mentioned as ''backup server or gateway server" in the system requirements meaning it will always be a single server but could be either backup server or a dedicated gateway. Proxies do not need access to the target array.
-
- Veeam Legend
- Posts: 184
- Liked: 49 times
- Joined: Mar 22, 2017 11:10 am
- Full Name: Mark Boothman
- Location: Darlington, United Kingdom
- Contact:
Re: Adding HPE StoreOnce to Backup Infrastructure - Question
We have 2 interfaces on our gateways. 1 is for communication to VBR, the other is the 10GB link to the StoreOnce on a separate network.
We add the GW's into VBR using the IP range accessible to VBR.
Hope that helps
We add the GW's into VBR using the IP range accessible to VBR.
Hope that helps
Who is online
Users browsing this forum: No registered users and 9 guests