Discussions related to exporting backups to tape and backing up directly to tape.
Post Reply
manuel1985
Novice
Posts: 4
Liked: never
Joined: May 28, 2015 2:39 pm
Contact:

Script Execution Timed Out

Post by manuel1985 »

Hey Guys,

I've got the following environment:
Windows Server 2008 R2 Standard on IBM BladeServer HS22V with Veeam Backup & Replication 8 Standard Update 2 installed. IBM TS3100 Tape Library connected by SAS to the Server.
I've installed latest IBM non-exclusive Tape Drive-Drivers and Controller-Drivers on the Server, did a Firmware-Upgrade on the SAS-Controller and on the Tape Library.

There are some Backup2Tape-Jobs, to copy backed up VMs from HDD to LTO5-Tape.
These Jobs start and after about 45min they cancel with the error message "Script Execution Timed Out". They copied round about 1.5GB.

Has anyone an idea to fix this issue?

Kind Regards
Manuel
foggy
Veeam Software
Posts: 21069
Liked: 2115 times
Joined: Jul 11, 2011 10:22 am
Full Name: Alexander Fogelson
Contact:

Re: Script Execution Timed Out

Post by foggy »

Manuel, have you already contacted support team with this issue?
manuel1985
Novice
Posts: 4
Liked: never
Joined: May 28, 2015 2:39 pm
Contact:

Re: Script Execution Timed Out

Post by manuel1985 »

Hello Foggy,

yes, I did, but the support has not really an idea to fix it.
We are in contact since six weeks...
veremin
Product Manager
Posts: 20270
Liked: 2252 times
Joined: Oct 26, 2012 3:28 pm
Full Name: Vladimir Eremin
Contact:

Re: Script Execution Timed Out

Post by veremin »

Can you post your ticket number here, so that, we can ask our QA team to take a look at it? Thanks.
Dima P.
Product Manager
Posts: 14396
Liked: 1568 times
Joined: Feb 04, 2013 2:07 pm
Full Name: Dmitry Popov
Location: Prague
Contact:

Re: Script Execution Timed Out

Post by Dima P. » 1 person likes this post

Hello Manuel,
Are you referring to the case 00929322 which was opened 5/29/2015 10:40 AM? Thanks
Lord-Data
Novice
Posts: 7
Liked: never
Joined: Apr 12, 2015 10:41 pm
Full Name: Michael James Saunders
Contact:

Re: Script Execution Timed Out

Post by Lord-Data »

I had exactly this error, and support helped me out. It was a long processes, but in the end, the bottom line was, our (very low end) NAS was timing out sending data for some reason into the job. Eventually I managed to get SSH access into the NAS and comb through the logs, to find it was actually suffering bad sectors and invalid data reads, causing timeouts/delays, but for whatever stupid reason, not reporting them anywhere! So certainly don't consider that the job is valid or complete.
manuel1985
Novice
Posts: 4
Liked: never
Joined: May 28, 2015 2:39 pm
Contact:

Re: Script Execution Timed Out

Post by manuel1985 »

Hello,

sorry for that late answer. Had a lot of work to do.
@Dima: yes, Case ID 00929322.

Actually it seems, that the problem is between Tape Drive and Controller. I performed a check with IBM Tape Diagnostic Tool (ITDT) and get „SCSI CMD TIMEOUT“ while doing a "full write" to tape. 32GB were copied with a transfer rate of 14.5 MB/s.
Dima P.
Product Manager
Posts: 14396
Liked: 1568 times
Joined: Feb 04, 2013 2:07 pm
Full Name: Dmitry Popov
Location: Prague
Contact:

Re: Script Execution Timed Out

Post by Dima P. »

Thanks! Any luck with modifying the registry keys like described in following article: Tape Jobs fail with I/O errors or (SCSI) Bus resets?
manuel1985
Novice
Posts: 4
Liked: never
Joined: May 28, 2015 2:39 pm
Contact:

Re: Script Execution Timed Out

Post by manuel1985 »

Hello,

no, had no luck with the keys.
Actually, I've opened a Case at IBM Support, too. Should clean the drive three times and install latest Firmware. That did'nt help. Now I'm waiting for new instructions from IBM.
Post Reply

Who is online

Users browsing this forum: Google [Bot] and 10 guests