Discussions related to exporting backups to tape and backing up directly to tape.
Post Reply
Funki
Novice
Posts: 7
Liked: 1 time
Joined: Feb 09, 2015 8:22 am
Full Name: Alex

v9 Tape Issue

Post by Funki »

Good Morning,

after update to v9 i get some Errors with Tape Backup and GFS.

Created a Backup to Tape with GFS Pool as a Target, i got this Error:

Code: Select all

06.02.2016 00:00:18 :: No GFS candidate for Weekly media set was found for today, waiting 
Backup Job of all VM's is running on Friday 10:00 pm. This Job was creating a Full Synthetic Backup afterwards until 4:00 am.

But Tape Job didnt find a Backup File after 12 Hours runtime?

When i start the Backup to Tape Job manuell there is no Error. But it used the wrong Tape, Weekly Job used Monthly Tape. Which was not in the Pool of Weekly Tapes.
Only Option was to remove all Tapes from the Pool other then the one Weekly Tape.

I also ste the Option "Export the following media sets upon job completion" in the Tape Job
I got this Error:

Code: Select all

06.02.2016 14:52:33 :: Exporting media from library HP 1x8 G2 AUTOLDR 4.40 
06.02.2016 14:53:38 :: Failed to export tape: Cannot to detect I/E ports 
Other Problem is, i had a few Tapes without Barcode before in Use, now the Tapes have Barcodes, but an inventory will show this Error after update to v9:

Code: Select all

05.02.2016 19:45:30 Warning    Tape 1 from media set Media set 19.12.2015 22:37 has never been inventoried
05.02.2016 19:45:30 Warning    Tape 2 from media set Media set 19.12.2015 22:37 has never been inventoried
05.02.2016 19:45:30 Warning    Tape 3 from media set Media set 19.12.2015 22:37 has never been inventoried
05.02.2016 19:45:30 Warning    Tape 4 from media set Media set 19.12.2015 22:37 has never been inventoried
I didnt "remove from catalog" before i use the Barcode on the Tapes. Is it now a Problem? Is it possible to delete them in the SQL Database?


Veeam Support - Case # 01691193

Thanks for any Idea to solve this Problems.

regards
Alex
Dima P.
Product Manager
Posts: 14396
Liked: 1568 times
Joined: Feb 04, 2013 2:07 pm
Full Name: Dmitry Popov
Location: Prague
Contact:

Re: v9 Tape Issue

Post by Dima P. »

Hello Alex,

Were you able to resolve the said issues with the support team?
Backup Job of all VM's is running on Friday 10:00 pm. This Job was creating a Full Synthetic Backup afterwards until 4:00 am.
To clarify, the source backup to disk job was creating the synthetic full on Friday and backup to tape (GFS) was scheduled to run weekly backup to tape on Friday, is that correct?
Export the following media sets upon job completion" in the Tape Job
Unfortunately, known issue – will be fixed in the upcoming update (I am not sure but there might be a fix at the support side)
didnt "remove from catalog" before i use the Barcode on the Tapes
Possibly a conflict in the catalogue since these tapes were already added (as non labeled) and contain some data. Than you label them – and now its threated as a new tapes, although it still contains previously written data. Delete from catalogue (or short erase) should solve it.
Funki
Novice
Posts: 7
Liked: 1 time
Joined: Feb 09, 2015 8:22 am
Full Name: Alex

Re: v9 Tape Issue

Post by Funki »

Hello Dima,

sorry for the late Reply. I did some Trouble Shooting with the Support (Thanks to Nik H. which had a lot of Patience)

Fixed are now 2 Problems:
Export Media was Fixed with enable "Mail Slot" on HP 1/8 G2 Library. Because there were no "Export Slot" free before.
But after talking with Support i agreed this Function is useless for our Environment. But Export and Import is only working when i switch to "Use native SCSI Commands" with HP Drivers i only get an error.

The Export Media to "Vault" is the know Issue as far as i know.

After changing to "Use native SCSI..." the Library was also successfull in the Inventory from the Tapes. There was no Error like Tape 1 from media set Media set 19.12.2015 22:37 has never been inventoried.
So i think this Problem is fixed. Or only related to the HP Drivers(the latest one are installed on the Backup Server). Maybe there will be an update for the Drivers and FW in the next Time from HP.

One is current left:
But i Think its only a wrong Configuration from the Job. GFS Tape Job should start to run also on Friday?

Situation now:
Synthetic Full is starting on Friday 10:00 pm. The GFS Tape Job ist Starting Saturday 00:00. GFS Tape Job i s waiting for 24 Hours and will create a Synthetic Full for weekly Backup.

Backup this Week GFS Tape starting at 00:00 on Saturday.

Starting 00:00 i will see this Entry:
20.02.2016 00:00:40 :: Source backup files detected. VBK: 0, VBK map: 0, VIB: 0

For 26 Hours:

20.02.2016 00:00:40 :: Source job retry is required. Waiting...

After then:
20.02.2016 22:36:11 :: Full backup from Daily Backup Job2016-02-20T220052.vib (20.02.2016 00:00:00) restore point will be placed to weekly media set
20.02.2016 22:36:11 :: Source backup files detected. VBK: 0, VBK map: 1, VIB: 0
20.02.2016 22:36:12 :: Creating full backup map for \\xxxxxxx\veeam_backup\Daily Backup Job\Daily Backup Job2016-02-20T220052.vib
21.02.2016 02:14:38 :: Processing finished at 21.02.2016 02:14:38
veremin
Product Manager
Posts: 20270
Liked: 2252 times
Joined: Oct 26, 2012 3:28 pm
Full Name: Vladimir Eremin
Contact:

Re: v9 Tape Issue

Post by veremin »

There are similar issues reported in the adjacent thread - the full backup created on a previous day doesn't get archived to GFS media pool. As far as I know, the issue is still under investigation.

Within your case It might be worth making a references to the tickets mentioned in the said thread.

Thanks.
Post Reply

Who is online

Users browsing this forum: No registered users and 27 guests