Standalone backup agents for Linux, Mac, AIX & Solaris workloads on-premises or in the public cloud
Post Reply
houla
Influencer
Posts: 11
Liked: 1 time
Joined: Jul 19, 2016 7:37 pm

recovery-media iso - won't boot

Post by houla »

- CentOS7 on vmware hypervisor 6.0 v2
- VAL installed on CentOS, all dependencies met/ok
- Backups created across LAN via CIFS ok
- Recovery-media iso bound to virtual cd drive, set as 1st boot dev, set to pwr on + connect at boot
- Errors out with 'No operating system found' and boots to CentOS
- Can install other vms from other iso files bound as above

Any suggestions would be appreciated - thanks.
nielsengelen
Product Manager
Posts: 5618
Liked: 1177 times
Joined: Jul 15, 2013 11:09 am
Full Name: Niels Engelen
Contact:

Re: recovery-media iso - won't boot

Post by nielsengelen »

How did you mount the iso to the virtual cd drive? Did you upload it on a datastore? Or did you try passthrough? Could you try to get the iso from the zip file and upload it to another datastore and test it again, just to make sure nothing is wrong with the ISO you are using right now?
Personal blog: https://foonet.be
GitHub: https://github.com/nielsengelen
PTide
Product Manager
Posts: 6408
Liked: 724 times
Joined: May 19, 2015 1:46 pm
Contact:

Re: recovery-media iso - won't boot

Post by PTide »

Hi,

Also I'm curious what's the boot firmware specified in the VM's options - BIOS or EFI? If the latter then it's a known bug - the current version of recovery media just won't boot.

Thanks
houla
Influencer
Posts: 11
Liked: 1 time
Joined: Jul 19, 2016 7:37 pm

Re: recovery-media iso - won't boot

Post by houla »

vmniels wrote:How did you mount the iso to the virtual cd drive? Did you upload it on a datastore? Or did you try passthrough? Could you try to get the iso from the zip file and upload it to another datastore and test it again, just to make sure nothing is wrong with the ISO you are using right now?
The iso was/is uploaded to the datastore - in the settings for the vm, the cd drive is 'pointed' to the correct iso in the datastore, is not set to passthrough, and the virtual device node is IDE cd/dvd drive 1 - setting to passthrough while in the config window does not hold and reverts back to Emulate IDE after clicking OK.

We will try another copy of the iso from the zip package.

Thanks
houla
Influencer
Posts: 11
Liked: 1 time
Joined: Jul 19, 2016 7:37 pm

Re: recovery-media iso - won't boot

Post by houla »

PTide wrote:Hi,

Also I'm curious what's the boot firmware specified in the VM's options - BIOS or EFI? If the latter then it's a known bug - the current version of recovery media just won't boot.

Thanks
In the boot options tab of the vm settings, BIOS is selected, not EFI
houla
Influencer
Posts: 11
Liked: 1 time
Joined: Jul 19, 2016 7:37 pm

Re: recovery-media iso - won't boot

Post by houla » 1 person likes this post

Replacing the iso file with a fresh copy did the trick - and were were able to restore our test backup job (volume) via cifs.

Thanks again.
nielsengelen
Product Manager
Posts: 5618
Liked: 1177 times
Joined: Jul 15, 2013 11:09 am
Full Name: Niels Engelen
Contact:

Re: recovery-media iso - won't boot

Post by nielsengelen »

Happy testing. Looking forward to your feedback.
Personal blog: https://foonet.be
GitHub: https://github.com/nielsengelen
WayneF1
Novice
Posts: 4
Liked: never
Joined: Jul 27, 2016 7:00 pm
Full Name: Wayne Edgar
Contact:

[MERGED] Is the Restore ISO UEFI compatible?

Post by WayneF1 »

I am testing restoring an entire VM to Microsoft Hyper-V Virtual Machine but I am not able to boot the ISO as it says it media is not UEFI compatible file system. Is this a known issue? Is the restore media suppose to be UEFI compatible and will it be in the future?

Image
nielsengelen
Product Manager
Posts: 5618
Liked: 1177 times
Joined: Jul 15, 2013 11:09 am
Full Name: Niels Engelen
Contact:

Re: recovery-media iso - won't boot

Post by nielsengelen »

Is this a gen2 vm? UEFI will ofcourse be fully supported with GA release.
Personal blog: https://foonet.be
GitHub: https://github.com/nielsengelen
WayneF1
Novice
Posts: 4
Liked: never
Joined: Jul 27, 2016 7:00 pm
Full Name: Wayne Edgar
Contact:

Re: recovery-media iso - won't boot

Post by WayneF1 »

Yes it is a Gen2 VM. Should I be only testing with Gen1 VMs for now?

It sounds like you are saying it is known that the recovery ISO is not UEFI bootable currently but it is planned to be.
nielsengelen
Product Manager
Posts: 5618
Liked: 1177 times
Joined: Jul 15, 2013 11:09 am
Full Name: Niels Engelen
Contact:

Re: recovery-media iso - won't boot

Post by nielsengelen »

I can't confirm it right now if it supported in the beta :-). Just saying that if it is a known issue right now it will work in the GA version. Gen2 VM's should allow it as Gen1 doesn't if I am correct. Will have to test it and get back to you if it is a known issue or not.
Personal blog: https://foonet.be
GitHub: https://github.com/nielsengelen
PTide
Product Manager
Posts: 6408
Liked: 724 times
Joined: May 19, 2015 1:46 pm
Contact:

Re: recovery-media iso - won't boot

Post by PTide »

It sounds like you are saying it is known that the recovery ISO is not UEFI bootable currently but it is planned to be.
Yes, it's a known bug with beta recovery meda .iso
Post Reply

Who is online

Users browsing this forum: balseb and 12 guests