Host-based backup of VMware vSphere VMs.
Post Reply
lightsout
Expert
Posts: 227
Liked: 62 times
Joined: Apr 10, 2014 4:13 pm
Contact:

SureBackups failing after VCSA 6.5 U1 update

Post by lightsout »

Hey all,

I've raised a case #02283823, but as vSphere 6.5 U1 does seem to be supported I was curious if anyone else has seen it.

Our ESXi servers are running 6.0 patch 5, and are unchanged. Veeam is 9.5 release 2. We upgraded from VCSA 6.5e to 6.5U1, and since then, all of my Sure Backup job fail:
8/10/2017 7:00:07 PM Getting virtual lab configuration
8/10/2017 7:11:00 PM Error Starting virtual lab routing engine
8/10/2017 7:11:00 PM Error Timed out waiting for proxy appliance to respond. Possible causes:
8/10/2017 7:11:00 PM Error 1. Appliance is configured to run on different network than backup server
8/10/2017 7:11:00 PM Error 2. Appliance is configured to obtain IP address automatically, but DHCP server is not available
8/10/2017 7:11:00 PM Stopping virtual lab routing engine
8/10/2017 7:14:14 PM Error: The operation has timed out.
8/10/2017 7:15:28 PM Job finished
However, there is no network problem. I can ping the Veeam appliance over the network and from the console it all looks fine. This problem started the same day we did the U1 upgrade, so I'm assuming that is the cause.

Anyone else seen/aware of this?
foggy
Veeam Software
Posts: 21069
Liked: 2115 times
Joined: Jul 11, 2011 10:22 am
Full Name: Alexander Fogelson
Contact:

Re: SureBackups failing after VCSA 6.5 U1 update

Post by foggy »

Have you tried to redeploy the appliance?
lightsout
Expert
Posts: 227
Liked: 62 times
Joined: Apr 10, 2014 4:13 pm
Contact:

Re: SureBackups failing after VCSA 6.5 U1 update

Post by lightsout »

Yes I have. In one case it seems to have helped, in another no difference. We were seeing this on multiple Veeam servers.
foggy
Veeam Software
Posts: 21069
Liked: 2115 times
Joined: Jul 11, 2011 10:22 am
Full Name: Alexander Fogelson
Contact:

Re: SureBackups failing after VCSA 6.5 U1 update

Post by foggy »

Please continue working with your engineer on this issue.
Post Reply

Who is online

Users browsing this forum: No registered users and 86 guests