Discussions related to exporting backups to tape and backing up directly to tape.
Post Reply
pronto
Expert
Posts: 110
Liked: 4 times
Joined: Apr 20, 2016 7:03 am
Contact:

Restore Single Item From Tape

Post by pronto »

Hi Community,

We want to move backup to disk jobs to tape after a week. Now we are testing some restore szenarios and we figured out that our concept to restore single files from the tape seems not to be practicable. Is there another possibility to restore single files from a tape backup than to restore the complete VBK- or VBI-files? This can be a huge amount of data and probably needs a very long time.

The concept with backup files to tape instead has other problems. For example we have to add the servers as managed servers in the Veeam console and therefore the Backup to tape works over the network. But a LTO-6 or LTO-7 drive is much faster than a gigabit network, so the drive has to reduce the speed of the tape which is a) not recommended and b) wasting resources. Furthermore we have two independent backup szenarios (Backup to disk and backup to tape) what seems to be pretty much senseless.

Is there another possibility to handle restores from large backups than to restore the complete amount of data first? What did we overlook?

Thanks for reading and in advance & Bye Tom
Dima P.
Product Manager
Posts: 14396
Liked: 1568 times
Joined: Feb 04, 2013 2:07 pm
Full Name: Dmitry Popov
Location: Prague
Contact:

Re: Restore Single Item From Tape

Post by Dima P. »

Hello Tom,

Single file restore from tape is possible only in case you are using file to tape jobs (backing up files to tape). For backup files (or backup to tape jobs) you have an option to restore backup to the staged repository (and then perform a file level recovery from disk) or restore a VM from tape directly to your VMware/Hyper-V host. Thanks!
pronto
Expert
Posts: 110
Liked: 4 times
Joined: Apr 20, 2016 7:03 am
Contact:

Re: Restore Single Item From Tape

Post by pronto »

Hi Dima,
Dima P. wrote:Single file restore from tape is possible only in case you are using file to tape jobs (backing up files to tape). For backup files (or backup to tape jobs) you have an option to restore backup to the staged repository (and then perform a file level recovery from disk) [...]
Oh, that's a real setback. File-to-tape backup over the network is a huge waste of tape device resources, as a LTO-7 drive is almost twice as fast as a gigabit network and when the drive needs to wait for data and go into a stop-and-go mode, the durability suffers enormously. On the other hand, it's nonsense to restore a multi-terabyte volume just to restore a single file. This is expensive and impractical, you should reconsider that please...

We'll (or have to) find a workaround but it would be nice if Veeam took the problem seriously, because it's really a serious problem. Maybe you have the opportunity to pass this as a feature request to the responsible department. Thank you.

Thx & Bye Tom
veremin
Product Manager
Posts: 20271
Liked: 2252 times
Joined: Oct 26, 2012 3:28 pm
Full Name: Vladimir Eremin
Contact:

Re: Restore Single Item From Tape

Post by veremin »

Consider your feature request noted. Thanks.
Post Reply

Who is online

Users browsing this forum: No registered users and 27 guests