Standalone backup agent for Microsoft Windows servers and workstations (formerly Veeam Endpoint Backup FREE)
Post Reply
neo0711
Lurker
Posts: 2
Liked: never
Joined: Mar 11, 2019 11:12 am
Full Name: PL
Contact:

Bare Metal Recovery from legacy mode system to UEFI system

Post by neo0711 »

Dear all,

I use the Veeam Agent for Windows (version 2.0) on my client .
System is a Dell Precision M 4700 running in legacy mode.
OS – W10

I got a brand-new Dell Precision7530.
The new system is not able to run the internal drives in legacy mode but UEFI.

I wanted to make a “Bare Metal Recovery” from the “old“ Dell Precision M 4700 running in legacy mode to the “new” system Dell Precision7530 running in UEFI mode which failed.
The new system is not able to boot the restored system.

It has to with MBR format (of the old system running in legacy mode) and the GBT format of the “new” system running in legacy mode).

Is there a manual / guideline how to deal with this scenario?

Best regards,

Peter
Dima P.
Product Manager
Posts: 14396
Liked: 1568 times
Joined: Feb 04, 2013 2:07 pm
Full Name: Dmitry Popov
Location: Prague
Contact:

Re: Bare Metal Recovery from legacy mode system to UEFI system

Post by Dima P. »

Hello Peter,

Can you please clarify if it's possible to switch newly restored machine to legacy mode by adjusting BIOS properties? Thanks!
neo0711
Lurker
Posts: 2
Liked: never
Joined: Mar 11, 2019 11:12 am
Full Name: PL
Contact:

Re: Bare Metal Recovery from legacy mode system to UEFI system

Post by neo0711 »

Dear Dima,

I already checked this and ist is not possible.Please see below:
https://www.dell.com/support/article/de ... de?lang=en

Best regards,

Peter
Dima P.
Product Manager
Posts: 14396
Liked: 1568 times
Joined: Feb 04, 2013 2:07 pm
Full Name: Dmitry Popov
Location: Prague
Contact:

Re: Bare Metal Recovery from legacy mode system to UEFI system

Post by Dima P. »

Peter,

You can convert MBR partition to GPT partition while booted in Veeam Recovery Media. If that sounds too complex please reach our support team and they will assist you with entire process. Cheers!
nate.lawson@egov.com
Novice
Posts: 3
Liked: 1 time
Joined: Sep 10, 2019 7:44 pm
Full Name: Nate Lawson
Contact:

Re: Bare Metal Recovery from legacy mode system to UEFI system

Post by nate.lawson@egov.com » 1 person likes this post

I had the same issue and was able to fix it using MBR2GPT - accessible through cmd prompt:

Boot to the VEEAM recovery media, open the tools section and then a cmd window:

Use "diskpart" and then "list disk" to find the disk containing the system partition, then:

> mbr2gpt \validate \disk:x ("x" being your target disk)
> mbr2gpt \convert \disk:x
Post Reply

Who is online

Users browsing this forum: No registered users and 46 guests