Comprehensive data protection for all workloads
Post Reply
davidb1234
Expert
Posts: 162
Liked: 15 times
Joined: Nov 15, 2011 8:47 pm
Full Name: David Borden
Contact:

VM becomes locked after attempted veeam backup. Yikes!

Post by davidb1234 »

We have purchased VEEAM and I am doing some testing with some VMs. I created a reverse incremental job to backup 5 VMs to disk and the first time I ran the job it worked great.

I reran the same job about 30 minutes later and I got SOAP FAULT CBT ERRORs on a VM.

I tried powering on the VM and was unable to power on as the VM files are locked. I opened a case with VMWARE and they are very confused about what is happening and I can't help but blame veeam since this VM was fine until I tried to backup with VEEAM.

The VMs I am backing up are powered off during the backup.

VMWARE support was able to clear the locks on the files eventually but when I reran the backup more SOAP FAULTS CBT ERRORS and the VM is locked again.

We started on Veeam 6 update 3 so we are fully up to date. Has anyone seen this error this is pretty serious.... VMWARE is still trying to figure out why the files are locked and how to release them. We are using ESXi 5.0 Update 1 fully up to date.

Code: Select all

TPL-7X64_BASE	Warning	8:52:05 AM	8:55:34 AM	40.0 GB	36.0 GB	1.1 MB	0:03:28 	Cannot use CBT: Soap fault. A specified parameter was not correct. . deviceKeyDetail: '<InvalidArgumentFault xmlns="urn:internalvim25" xsi:type="InvalidArgument"><invalidProperty>deviceKey</invalidProperty></InvalidArgumentFault>', endpoint: ''
TPL-W2K8X86	Warning	9:00:01 AM	9:03:53 AM	40.0 GB	37.7 GB	1.2 MB	0:03:51 	Cannot use CBT: Soap fault. A specified parameter was not correct. . deviceKeyDetail: '<InvalidArgumentFault xmlns="urn:internalvim25" xsi:type="InvalidArgument"><invalidProperty>deviceKey</invalidProperty></InvalidArgumentFault>', endpoint: ''
These VMs are single DISK VMs about 40GB each. Nothing special.
davidb1234
Expert
Posts: 162
Liked: 15 times
Joined: Nov 15, 2011 8:47 pm
Full Name: David Borden
Contact:

Re: VM becomes locked after attempted veeam backup. Yikes!

Post by davidb1234 »

disregard this was not a VEEAM issue.
Gostev
Chief Product Officer
Posts: 31460
Liked: 6648 times
Joined: Jan 01, 2006 1:01 am
Location: Baar, Switzerland
Contact:

Re: VM becomes locked after attempted veeam backup. Yikes!

Post by Gostev »

What was causing the issue?
davidb1234
Expert
Posts: 162
Liked: 15 times
Joined: Nov 15, 2011 8:47 pm
Full Name: David Borden
Contact:

Re: VM becomes locked after attempted veeam backup. Yikes!

Post by davidb1234 »

The locked file was due to some other VM using the base disk of the template. it must have been a bug when the Vm was deployed.

However i am still chasing this soap fault CBT error problem that seems to appear and reappear. Seems to happen on powered off VMs. Any ideas on this?
davidb1234
Expert
Posts: 162
Liked: 15 times
Joined: Nov 15, 2011 8:47 pm
Full Name: David Borden
Contact:

Re: VM becomes locked after attempted veeam backup. Yikes!

Post by davidb1234 »

Are these types of errors normal when backing up powered off VMs?

Code: Select all

TPL-W2K8R2	Warning	9:30:02 AM	9:31:57 AM	50.0 GB	46.0 GB	1.4 MB	0:01:55 	Cannot use CBT: Soap fault. A specified parameter was not correct. . deviceKeyDetail: '<InvalidArgumentFault xmlns="urn:internalvim25" xsi:type="InvalidArgument"><invalidProperty>deviceKey</invalidProperty></InvalidArgumentFault>', endpoint: ''
TPL-7X64_BASE	Warning	9:24:48 AM	9:27:23 AM	40.0 GB	36.0 GB	1.1 MB	0:02:35 	Cannot use CBT: Soap fault. A specified parameter was not correct. . deviceKeyDetail: '<InvalidArgumentFault xmlns="urn:internalvim25" xsi:type="InvalidArgument"><invalidProperty>deviceKey</invalidProperty></InvalidArgumentFault>', endpoint: ''
TPL-XPX86_BASE	Warning	9:21:39 AM	9:24:45 AM	32.0 GB	30.0 GB	960.8 KB	0:03:05 	Cannot use CBT: Soap fault. A specified parameter was not correct. . deviceKeyDetail: '<InvalidArgumentFault xmlns="urn:internalvim25" xsi:type="InvalidArgument"><invalidProperty>deviceKey</invalidProperty></InvalidArgumentFault>', endpoint: ''
TPL-W2K8X64	Warning	9:35:46 AM	9:39:16 AM	40.0 GB	37.7 GB	1.2 MB	0:03:30 	Cannot use CBT: Soap fault. A specified parameter was not correct. . deviceKeyDetail: '<InvalidArgumentFault xmlns="urn:internalvim25" xsi:type="InvalidArgument"><invalidProperty>deviceKey</invalidProperty></InvalidArgumentFault>', endpoint: ''
TPL-W2K8X86	Warning	9:32:00 AM	9:35:43 AM	40.0 GB	37.7 GB	1.2 MB	0:03:42 	Cannot use CBT: Soap fault. A specified parameter was not correct. . deviceKeyDetail: '<InvalidArgumentFault xmlns="urn:internalvim25" xsi:type="InvalidArgument"><invalidProperty>deviceKey</invalidProperty></InvalidArgumentFault>', endpoint: ''
TPL-7X86_BASE	Warning	9:27:26 AM	9:29:59 AM	40.0 GB	38.0 GB	1.4 GB	0:02:32 	Cannot use CBT: Soap fault. Error caused by file /vmfs/volumes/4f73455a-45dc313c-c1a5-0024817bc7c0/TPL-7X86_BASE/TPL-7X86_BASE.vmdkDetail: '', endpoint: ''
rbrambley
Veeam Software
Posts: 481
Liked: 57 times
Joined: Jun 16, 2009 1:23 pm
Full Name: Rich Brambley
Contact:

Re: VM becomes locked after attempted veeam backup. Yikes!

Post by rbrambley » 1 person likes this post

Check out this thread on the same topic. (This might be merged to it or another like it)
v6 "Cannot use CBT. Soap fault" ... fixed
Post Reply

Who is online

Users browsing this forum: Google [Bot] and 253 guests