-
- Enthusiast
- Posts: 65
- Liked: 1 time
- Joined: Apr 28, 2012 9:51 pm
- Full Name: Ori Besser
- Contact:
SNMP traps version
Hi,
I have configured the monitor (version 6.5) to send traps to our central monitoring system and I have noticed that the traps being sent are SNMPv1. Is there any way to configure Veeam ONE to send v2 traps?
This is a tcpdump from the nagios server:
15:12:06.986849 IP (tos 0x0, ttl 128, id 17112, offset 0, flags [none], proto UDP (17), length 309)
172.x.x.x.64636 > 172.y.y.y.snmptrap: [udp sum ok] { SNMPv1 { Trap(262) .1.3.6.1.4.1.6876.50 172.x.x.x enterpriseSpecific s=201 51755470 .1.3.6.1.4.1.6876.50.301="Virtual machine" .1.3.6.1.4.1.6876.50.302=" " .1.3.6.1.4.1.6876.50.303="vm_name" .1.3.6.1.4.1.6876.50.304="Reset/resolved" .1.3.6.1.4.1.6876.50.305="Warning" .1.3.6.1.4.1.6876.50.306="VM CPU ready - ("Average CPU ready" (<b>10%</b>) is above a defined threshold (10%)<br/>)" } }
I have configured the monitor (version 6.5) to send traps to our central monitoring system and I have noticed that the traps being sent are SNMPv1. Is there any way to configure Veeam ONE to send v2 traps?
This is a tcpdump from the nagios server:
15:12:06.986849 IP (tos 0x0, ttl 128, id 17112, offset 0, flags [none], proto UDP (17), length 309)
172.x.x.x.64636 > 172.y.y.y.snmptrap: [udp sum ok] { SNMPv1 { Trap(262) .1.3.6.1.4.1.6876.50 172.x.x.x enterpriseSpecific s=201 51755470 .1.3.6.1.4.1.6876.50.301="Virtual machine" .1.3.6.1.4.1.6876.50.302=" " .1.3.6.1.4.1.6876.50.303="vm_name" .1.3.6.1.4.1.6876.50.304="Reset/resolved" .1.3.6.1.4.1.6876.50.305="Warning" .1.3.6.1.4.1.6876.50.306="VM CPU ready - ("Average CPU ready" (<b>10%</b>) is above a defined threshold (10%)<br/>)" } }
-
- VP, Product Management
- Posts: 27377
- Liked: 2800 times
- Joined: Mar 30, 2009 9:13 am
- Full Name: Vitaliy Safarov
- Contact:
Re: SNMP traps version
Hello Ori,
I don't think there is a way to change that without changing actual code, but I will double-check that with the devs tomorrow.
Thank you!
I don't think there is a way to change that without changing actual code, but I will double-check that with the devs tomorrow.
Thank you!
-
- Enthusiast
- Posts: 65
- Liked: 1 time
- Joined: Apr 28, 2012 9:51 pm
- Full Name: Ori Besser
- Contact:
Re: SNMP traps version
Vitaliy, any update on this?
Thanks
Thanks
-
- VP, Product Management
- Posts: 27377
- Liked: 2800 times
- Joined: Mar 30, 2009 9:13 am
- Full Name: Vitaliy Safarov
- Contact:
Re: SNMP traps version
Not sure it is possible to change that, but can you please tell me why this is important, so I could plan this feature for the next updates?
-
- Enthusiast
- Posts: 65
- Liked: 1 time
- Joined: Apr 28, 2012 9:51 pm
- Full Name: Ori Besser
- Contact:
Re: SNMP traps version
Security concerns, I believe it is required by regulation.
-
- VP, Product Management
- Posts: 27377
- Liked: 2800 times
- Joined: Mar 30, 2009 9:13 am
- Full Name: Vitaliy Safarov
- Contact:
Re: SNMP traps version
Makes sense.
Who is online
Users browsing this forum: No registered users and 3 guests